Кодирование BMW F10 в Esys - список параметров

Admin · 29.11.2014, 01:36

Подборка полезной информации по кодированию BMW F10 в Esys. В приложенном файле.

Admin · 29.11.2014, 01:37

Тоже самое, только в более удобном виде, есть в приложенных файлах (см. выше):

Model Module Subsection Function New value Default Description
F10/F11 HKFM 3010 HKL_BEDIENUNG SCH_TOEHKI active = 01 not active = 00 Button on driver-side will be enabled to CLOSE the trunk
F10/F11 HKFM 3010 HKL_BEDIENUNG SCH_FBD aktiv nicht_aktiv Button on key fob will be enabled to CLOSE the trunk
F10/F11 HKFM 3010 HKL_BEDIENUNG TASTER_FBD aktiv nicht_aktiv Button on key fob will be enabled to CLOSE the trunk

F10/F11 KOMBI 3000 Anzeige_Konfiguration BC_DIGITAL_V active = 01 not active = 00 Digital tacho is a new option in BC
KOMBI 3000 Anzeige HUD_START_UP_SCREEN_ANZ_ZEIT At the start of the HUD will appear, this screen for encoded time. In 1 s increments. 0s = no display
KOMBI 3000 Anzeige BLINKER_HUD_ENABLE

F10/F11 HU_CIC 3000 HMI SPEEDLOCK_X_KMH_MIN value = FF 3_kmh = 3 or 8_kmh = 8 Disable DVD Speedlock - Part 1
F10/F11 HU_CIC 3000 HMI SPEEDLOCK_X_KMH_MAX value = FF 3_kmh = 3 or 8_kmh = 8 Disable DVD Speedlock - Part 2
F10/F11 HU_CIC 3000 HMI VIDEO_NUR_MIT_HANDBREMSE not active = 00 active = 01 Video just in combination with handbrake
F10/F11 HU_CIC 3000 HMI NAVI_FUELSTOP_PROPOSAL aktiv nicht_aktiv Go to "Route Information" on iDrive when you're going somewhere and it will tell you at what point(s) along your journey you'll likely need to fill up. You can then select that notice and it will tell you about the stations in the area at that point on your trip.
HU_CIC 3000 HMI L7_SURROUND_CONFIG Replaces "Surround" on/off checkbox with "L7 Surround" Slider (-5/+5) on Settings=>Tone screen
HU_CIC 3000 HMI HUD_TURNSIGNAL Turn indicator in the HUD
HU_CIC 3000 HMI HUD_DISTANCE_INFO I presume this is iBrake Distance for Active Cruise Control

F10/F11 HU_CIC 3001 EXBOX LEGAL_DISCLAIMER_TIME kein_ld ld_mit_timeout Disables iDrive legal disclaimer during iDrive startup. Change the value: ld_mit_timeout --> kein_ld
HU_CIC 3001 EXBOX MACRO_CAM_LEGALDISCLAIMER kein_id Disable legal disclaimer on PDC and Sideview Cameras
F10/F11 HU_CIC 3001 EXBOX MACRO_NIVICAM_LDISCLAIMER kein_id Disable legal disclaimer on Night Vision Camera

F11 ACSM 3000 Ausstattungsflags SBR_FA_GWF_SBR_FA not active = 00 active = 01 disable seat belt reminder - driver
F11 ACSM 3000 Ausstattungsflags SBR_BF_GWF_SBR_BF not active = 00 active = 01 disable seat belt reminder - passenger
F11 ACSM 3000 Ausstattungsflags Gurtzustandsanzeige_Fahrer_GWF_GZA_FA not active = 00 active = 01 disable seat belt status display - driver
F11 ACSM 3000 Ausstattungsflags Gurtzustandsanzeige_Beifahrer_GWF_GZA_BF not active = 00 active = 01 disable seat belt status display - passenger
F11 ACSM 3000 Ausstattungsflags SPW_FA not active = 00 active = 01 disable sound on disconnect SB - driver
F11 ACSM 3000 Ausstattungsflags SPW_BF not active = 00 active = 01 disable sound on disconnect SB - passenger

F10/F11 CAS 3002 CLM ER_KEYOUT_AUTOVR aktiv nicht_aktiv Tested with Comfort Access. Unlocks doors when engine is stopped (start/stop button is pushed). Allows single pull to open doors.
F10/F11 CAS 3020 FRM SPIEGEL PARAMETER ASP_BEIKLAPPEN_B_KOMFORTSCHL aktiv nicht_aktiv Folds mirrors with long hold of lock button on key fob. Folds mirrors with long hold of door ridges on comfort access equipped vehicles.
F10/F11 CAS 3003 FH MASTER KOMFORTSCHLIESSUNG_FB aktiv nicht_aktiv Closes windows + moon roof through Key Fob
F10/F11 CAS 3003 FH MASTER KOMFORTSCHLIESSUNG_PA aktiv nicht_aktiv Closes windows + moon roof through comfort access

F10/F11 FRM 3030 FRM FH PARAMETER FH_TUER_AUF_STOP_MAUT nicht_aktiv aktiv Opening doors will not interrupt window roll up operation. Normally, if you open a door while the window is automatically rolling up, it will stop the operation. This feature disables it. May need to wait for iDrive to reset for activation
FRM 3050 FRM NSW_AUS_BEI_FL Change to nicht_aktiv to enbale Fog Lights with High Beams / Flashers
FRM 3050 FRM HELLIGKEIT_FL_BIXENON High Beam Brightness in %
FRM 3050 FRM HELLIGKEIT_DRL DRL Brightness in %
FRM 3050 FRM DRL_MODUS 0: DRL disabled; 1: DRL_H via beam, halogen U.S. (without lights); 2: DRL_L via low beam; 3: DRL_S via separate TFLeuchte; U.S. Xenon (rings + bottom); 4: TFL_S via separate TFLeuchte; ECE Xenon (rings + bottom); 5: TFL_ECE (North Country Comfort); 6: DRL_S_ohne_SL via separate TFLeuchte without taillight / tail lights, U.S.; 7: TFL_S_ohne_SL via separate TFLeuchte without tail light / rear light, ECE

FRM 3050 FRM WL_FUNKTION_NSW Welcome Lights - Fog Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)
FRM 3050 FRM WL_FUNKTION_KZL License Plate Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)
FRM 3050 FRM WL_FUNKTION_SSL Tail Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)
FRM 3050 FRM WL_FUNKTION_POL Position Lights (Front Side LED's) - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)
FRM 3050 FRM WL_FUNKTION_AL Low Beam Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)
FRM 3050 FRM WL_FUNKTION_FL High Beam - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)
FRM 3050 FRM WL_TIMEOUT Welcome Light: Activation time

FRM 3050 FRM FOMEHO_TIMEOUT FollowMeHome: Activation time
FRM 3050 FRM FLB_NSW high beam flashing: Control Fog Lights: 0: NSW inactive, 1: NSW blink as FL / TFL
FRM 3050 FRM FLB_INTERMITTIEREND high beam flash: Light control on the vehicle page: 0: in-phase, 1: intermittent, left and right opposite phase

IHKA 3000 IHKA_Codierdaten MEMORY_UMLUFT aktiv = always remember air recirculating

Admin · 29.11.2014, 21:12

ACSM 3001 GWF_SBR_WARNDAUER Werte = 01 (for 1 second) wert_01 / Werte=5A Comment = duration of the SBR (Seatbelt Reminder) warnings (typically 90s) - 5A HEX = 90 Decimal
ACSM 3000 Ausstattungsflags Gurtzustandsanzeige_Beifahrer_GWF_GZA_BF nicht_aktiv / Werte=00 aktiv / Werte=01 Disable seat belt status display - passenger
ACSM 3000 Ausstattungsflags Gurtzustandsanzeige_Fahrer_GWF_GZA_FA nicht_aktiv / Werte=00 aktiv / Werte=01 Disable seat belt status display - driver
ACSM 3000 Ausstattungsflags SBR_BF_GWF_SBR_BF nicht_aktiv / Werte=00 aktiv / Werte=01 Disable seat belt reminder - passenger
ACSM 3000 Ausstattungsflags SBR_FA_GWF_SBR_FA nicht_aktiv / Werte=00 aktiv / Werte=01 Disable seat belt reminder - driver
ACSM 3000 Ausstattungsflags SPW_BF nicht_aktiv / Werte=00 aktiv / Werte=01 Disable sound on disconnect SB - passenger
ACSM 3000 Ausstattungsflags SPW_FA nicht_aktiv / Werte=00 aktiv / Werte=01 Disable sound on disconnect SB - driver
ACSM 3000 Ausstattungsflags SeatBeltReminder_SBR_Fahrer nicht_aktiv / Werte=00 aktiv / Werte=01 Disable seat belt reminder - passenger
ACSM 3000 Ausstattungsflags SeatBeltReminder_SBR_Beifahrer nicht_aktiv / Werte=00 aktiv / Werte=01 Disable seat belt reminder - driver
ACSM 3000 Ausstattungsflags SBR_PreWarning_Fahrer nicht_aktiv / Werte=00 aktiv / Werte=01 Disable sound on disconnect SB - driver
ACSM 3000 Ausstattungsflags SBR_PreWarning_Beifahrer nicht_aktiv / Werte=00 aktiv / Werte=01 Disable sound on disconnect SB - passenger
ACSM 3000 Ausstattungsflags Initialwarnung_GWF_IW nicht_aktiv / Werte=00 aktiv / Werte=01 Disable initial seatbelt warning
CAS 3000 TC TC_MSA_DEFAULT_OFF aktiv / Werte=01 nicht_aktiv / Werte=00 Turn Auto Start/Stop OFF by default
CAS 3000 TC TC_MSA_MEMORY aktiv / Werte=01 nicht_aktiv / Werte=00 Sets car's Auto Start/Stop function to start in the last used setting (e.g. Off) when the engine is started
CAS 3002 CLM ER_KEYOUT_AUTOVR aktiv / Werte=01 nicht_aktiv / Werte=00 Unlocks doors when engine is stopped (start/stop button is pushed). Allows single pull to open doors.
CAS 3002 CLM OPEN_RSCR_WITH_REMOTE_KEY_SPFN aktiv / Werte=01 nicht_aktiv / Werte=00 Comment = Remote Key opens with a 4th button tailgate or rear window (active)
CAS 3002 CLM REAR_SCREEN_IS_PRIMARY aktiv / Werte=01 nicht_aktiv / Werte=00 Comment = Remote Key opens with 3rd button tailgate or rear window (active)
CAS 3002 CLM REMOTE_KEY_SPECIAL_FCT aktiv / Werte=01 nicht_aktiv / Werte=00 Button 4 (Panic Button).
CAS 3003 FH MASTER KOMFORTSCHLIESSUNG_FB aktiv / Werte=01 nicht_aktiv / Werte=00 Closes mirrors + windows + moon roof through Key Fob - Requires ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN set to aktiv
CAS 3003 FH MASTER KOMFORTSCHLIESSUNG_PA aktiv / Werte=01 nicht_aktiv / Werte=00 Closes mirrors + windows + moon roof through Comfort Access - Requires ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN set to aktiv
CAS 3003 FH_Master KMFRT_OEFF_HINTEN wert_01 / Werte=05 Comfort opening: Delay between front and rear windows - NOT TESTED
CAS 3003 FH_Master KMFRT_OEFF_SHD wert_01 / Werte=23 Comfort opening: Delay between the rear windows and SHD (Moon Roof) - NOT TESTED
CAS 3003 FH_Master KMFRT_SCHL_VORNE wert_01 / Werte=05 Connect Comfort: Delay between front and rear windows- NOT TESTED - Presumed Delay on Close
CAS 3003 FH_Master KOMFORT_SCHL_SHD wert_01 / Werte=23 Connect Comfort: Delay between the front windows and SHD (Moon Roof) - NOT TESTED - Presumed Delay on Close
CAS 3010 HKL_BEDIENUNG USE_FBD4 aktiv / Werte=01 nicht_aktiv / Werte=00 Comment = can be the key 4 the FBD (OP_KEY_BUT_SPFN) used for the opening of the HK. This feature is currently available for F11 and F07.
"CMB_MEDIA/
HU_NBT" 3001 TELEPHONE_PARAMETER INBAND_RINGING aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=The telephone ringtone is transferred to the Combox
CMB_MEDIA 3001 TELEPHONE_PARAMETER RINGTONE ring_tone2 / Werte=01 or ring_tone2 / Werte=01 Kommentar=Set the Ring Tone (if no Inband Ringing is set)
CMB_MEDIA 3006 TELEMATIK MY_INFO_SUPPORTED_POIS Increase CIC stored addresses/messages from 25 to 50
FRM 3020 ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN aktiv / Werte=01 nicht_aktiv / Werte=00 By itself does nothing, yet if it is not set to aktiv, neither KOMFORTSCHLIESSUNG_FB nor KOMFORTSCHLIESSUNG_PA will work,
FRM 3020 ASP_BORDSTEINAUTOMATIK_DELTA Werte=5A Werte=3B 2 character hexadecimal value that determines the angle of the passenger side mirror when the car is put into reverse
FRM 3030 FH_TUER_AUF_STOP_MAUT nicht_aktiv / Werte=00 aktiv / Werte=01 stop the operation. This feature disables it. May need to wait for iDrive to reset for activation
FRM 3050 DRL_MODUS drl_s / Werte=03 bottom); 4: TFL_S via separate TFLeuchte; ECE Xenon (rings + bottom); 5: TFL_ECE (North Country Comfort); 6: DRL_S_ohne_SL via separate / drl_s_ohne_sl /
FRM 3050 FLA_AUTO_AKTIV aktiv / Werte=01 nicht_aktiv / Werte=00 Set High Beam Assistant Defaukt to Automatic on
FRM 3050 FLB_INTERMITTIEREND asynchron / Werte=01 synchron / Werte=00 Presumed to work in conjunction with FLB_NSW
FRM 3050 FLB_NSW aktiv / Werte=01 nicht_aktiv / Werte=00 TESTING
FRM 3050 FOMEHO_FFB_SPFN_TIMESLOT wert_01__400ms / Werte=03 0: no activation of FMH by FFB SPFN possible; 1: 300 ms; 2: 350ms, 3 400ms, 4: 450ms;
FRM 3050 FOMEHO_TIMEOUT wert_01 / Werte=28 FollowMeHome: Activation time - NOT TESTED wert_01__100% /
FRM 3050 HELLIGKEIT_DRL wert_03__54% / wert_01__100% / Werte=64 Daytime Running Light (DRL) Brightness in % - NOT TESTED
FRM 3050 HELLIGKEIT_FL_BIXENON wert_01 / Werte=64 High Beam Brightness in % - NOT TESTED
FRM 3050 NSW_AUS_BEI_FL nicht_aktiv / Werte=00 aktiv / Werte=01 Change to nicht_aktiv to enbale Fog Lights with High Beams / Flashers - Works for Some and not others - Reason Unknown
FRM 3050 WL_FUNKTION_AL nicht_aktiv / Werte=00 Welcome Lights - Low Beam Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) hard_on / soft_on_LED
FRM 3050 WL_FUNKTION_FL nicht_aktiv / Werte=00 Welcome Lights - High Beam - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) hard_on / soft_on_LED
FRM 3050 WL_FUNKTION_KZL hard_on / Werte=02 Welcome Lights - License Plate Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) hard_on / soft_on_LED
FRM 3050 WL_FUNKTION_NSW nicht_aktiv / Werte=00 Welcome Lights - Fog Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) hard_on / soft_on_LED
FRM 3050 WL_FUNKTION_POL hard_on / Werte=02 Welcome Lights - Position Lights (Angel Eyes and Front Side LED's) - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) hard_on / soft_on_LED
FRM 3050 WL_FUNKTION_SSL hard_on / Werte=02 Welcome Lights - Tail Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) hard_on / soft_on_LED
FRM 3050 WL_TIMEOUT wert_01 / Werte=14 Welcome Light: Activation time - NOT TESTED
FRM 3050 ESS_ERSSCHEINUNGSBILD bremslicht blinkend (brake light flashing) flaechenvergroesserung (area enlargement) Brake Force Delay Option
FRM 3050 ESS_ON_VERZ (default for Europe (14 dec) 10 m/s2; default for US (10 dec) 8 m/s2) Brake Force Delay Option - This refers to deceleration speed
FRM 3050 ESS_GESCHW_SCHWELLE (default for Europe Werte=32 (50 dec) default for US Werte=05 (5 dec)) Brake Force Delay Option - This refers to the threshold speed for activation
FRM 3090 AUSG_11_NSW_L_IS_INDICATOR aktiv / Werte=01 nicht_aktiv / Werte=00 Expected Left Fog as Turn signal - No Noticeable Effect
FRM 3090 AUSG_12_NSW_R_IS_INDICATOR aktiv / Werte=01 nicht_aktiv / Werte=00 Expected Right Fog as Turn signal - No Noticeable Effect
HKFM 3010 SCH_FBD aktiv / Werte=01 nicht_aktiv / Werte=00 Button on key fob will be enabled to CLOSE the trunk - Does not work immediately; Allow for some time before it begins to work. Must enable TASTER_FBD
HKFM 3010 SCH_TOEHKI aktiv / Werte=01 nicht_aktiv / Werte=00 Button on driver-side will be enabled to CLOSE the trunk - Does not work immediately; Allow for some time before it begins to work
HKFM 3010 TASTER_FBD aktiv / Werte=01 nicht_aktiv / Werte=00 Use w/ Above
HU_CIC / HU_NBT 3000 HMI CDMM_ES_ALBUM_INFO aktiv / Werte=01 nicht_aktiv / Werte=00 Album-info on / off - No Noticeable Effect - NEEDS ADDITIONAL TESTING
HU_CIC / HU_NBT 3000 HMI COMFORT_OPENING aktiv / Werte=01 nicht_aktiv / Werte=00 This adds a new option "Comfort Acess" in Settings--->door locks-->Lock Button..Works same as "All Doors" NEEDS ADDITIONAL TESTING
HU_CIC / HU_NBT 3000 HMI DAYDRIVING_LIGHT standard / Werte=02 or standard / Werte=02 tick/untick this option. Useful for countries where DRL is not mandatory.
HU_CIC / HU_NBT 3000 HMI EFF_DYN_SAILING aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=Scheunert Bernd EI-42 - No Noticeable Effect
HU_CIC / HU_NBT 3000 HMI EFF_DYN_SPORT_CID aktiv / Werte=01 nicht_aktiv / Werte=00 even after enabling EFF_DYN_SPORT_UNIT, in which case see KOMBI / 3008 PIA_Einheiten / DREHMOMENT and LEISTUNG for
HU_CIC / HU_NBT 3000 HMI EFF_DYN_SYS_CID aktiv / Werte=01 nicht_aktiv / Werte=00 "Configure ECO PRO" to the Settings=>Driving mode screen. Since there is no actual ECO PRO Functionality, as it is not part of the MY 2011 Dynamic
HU_CIC / HU_NBT 3000 HMI HELLIGKEIT_AMBILIGHT Adds "Brightness” Slider (-5/+5) on Settings=>Lights Screen. Slider is non-functional Displays B & O sound menu - Removes L7 Surround Checkbox and Adds Bang & Oulfsen Menu to Settings=>Tone Screen with Studio and Expanded
HU_CIC / HU_NBT 3000 HMI HIGH_END_AUDIO_MENUE volle insz kein_menue / Werte=00 Settings - Nonfunctional
HU_CIC / HU_NBT 3000 HMI HUD_DISTANCE_INFO aktiv / Werte=01 nicht_aktiv / Werte=00 Enables Adapative Cruise Control iBrake Distance in HUD
HU_CIC / HU_NBT 3000 HMI HUD_TURNSIGNAL aktiv / Werte=01 nicht_aktiv / Werte=00 in Settings=>Heads-Up Display to work. Check Box does NOT appear on 2013.
HU_CIC / HU_NBT 3000 HMI L7_SURROUND_CONFIG aktiv / Werte=01 nicht_aktiv / Werte=00 left) and on (any setting other than full left).
HU_CIC / HU_NBT 3000 HMI LOGIC7_SYMBOL aktiv / Werte=01 nicht_aktiv / Werte=00 Screen.
HU_CIC / HU_NBT 3000 HMI M_DIGITAL_TACHO aktiv / Werte=01 nicht_aktiv / Werte=00 and with HUD
HU_CIC / HU_NBT 3000 HMI M_DIGITAL_TACHO_EINH aktiv / Werte=01 nicht_aktiv / Werte=00 NEEDS ADDITIONAL TESTING and with HUD
HU_CIC / HU_NBT 3000 HMI M_KEY_SETTINGS aktiv / Werte=01 nicht_aktiv / Werte=00 M key settings available - No Noticeable Effect - NEEDS ADDITIONAL TESTING
HU_CIC / HU_NBT 3000 HMI MDRIVE aktiv / Werte=01 nicht_aktiv / Werte=00 "M dynamic driving syst." checkbox on Settings=>Info Display screen. When checked it completely turns off the dashboard tachometer Efficient
HU_CIC / HU_NBT 3000 HMI MOMENTDISTRIBUTION_MENU aktiv / Werte=01 nicht_aktiv / Werte=00 Adds menu for xDrive Torque Distribution - NOT TESTED
HU_CIC / HU_NBT 3000 HMI NAVI_DEST_EXPORT aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=Memorized Point Export feature (via USB) is coded or not (Asia only)
HU_CIC / HU_NBT 3000 HMI NAVI_DEST_IMPORT aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=Memorized Point Import feature (via USB) is coded or not (Asia only)
HU_CIC / HU_NBT 3000 HMI NAVI_FUELSTOP_PROPOSAL aktiv / Werte=01 nicht_aktiv / Werte=00 "You can then select that notice and it will tell you about the stations in the area at that point on your trip.
Active by default on 2013"
HU_CIC / HU_NBT 3000 HMI NAVI_FULL_GUIDINGPOPUP aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=(This descibes whether the arrow popups are available in the main map window.)
HU_CIC / HU_NBT 3000 HMI NAVI_MAP_ARROWVIEW aktiv / Werte=01 nicht_aktiv / Werte=00 views
HU_CIC / HU_NBT 3000 HMI NAVI_MYPOI_EXPORT aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=TMyPOI Export feature (via USB) is coded or not (not for Asia)
HU_CIC / HU_NBT 3000 HMI NAVI_MYPOI_IMPORT aktiv / Werte=01 nicht_aktiv / Werte=00 Button=>Map
HU_CIC / HU_NBT 3000 HMI NAVI_RNC_MAINMAP_TEXT permanent / Werte=FF Kommentar=Describes, whether and how long the RNC infotext shall be shown on map 10_sekunden
HU_CIC / HU_NBT 3000 HMI NAVI_ROAD_PREVIEW aktiv / Werte=01 nicht_aktiv / Werte=00 Road preview is possible or not
HU_CIC / HU_NBT 3000 HMI NAVI_ROUTE_RECORD aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=Route record features are coded or not
HU_CIC / HU_NBT 3000 HMI NAVI_SPLIT_GUIDINGPOPUP nicht_aktiv / Werte=00 aktiv / Werte=01 Kommentar=(This descibes whether the arrow popups are available in the splitscreen.)
HU_CIC / HU_NBT 3000 HMI NAVI_TRIP_EXPORT aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=Trip Export feature (via USB) is coded or not
HU_CIC / HU_NBT 3000 HMI NAVI_TRIP_IMPORT aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=Trip Import feature (via USB) is coded or not - "Import trip (USB)" to Navigation=>Stored trips
HU_CIC / HU_NBT 3000 HMI NOTEPAD aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=Notepad available - No Noticeable Effect
HU_CIC / HU_NBT 3000 HMI RSE_BRIGHTNESS aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=enable RSE brightness - No Noticeable Effect
HU_CIC / HU_NBT 3000 HMI SPEEDLOCK_X_KMH_MAX value = FF (change the Werte value to FF) 3_kmh = 3 or 8_kmh = 8 Disable DVD Speedlock - Part 2
HU_CIC / HU_NBT 3000 HMI SPEEDLOCK_X_KMH_MIN value = FF (change the Werte value to FF) 3_kmh = 3 or 8_kmh = 8 Disable DVD Speedlock - Part 1
HU_CIC / HU_NBT 3000 HMI "VIDEO_NUR_MIT_HANDBREMSE/
VIDEO_HANDBRAKE" nicht_aktiv / Werte=00 aktiv / Werte=01 Video just in combination with handbrake. Use w/ above SPEEDLOCK_X_KMH_MIN and SPEEDLOCK_X_KMH_MAX.
HU_CIC / HU_NBT 3000 HMI ENT_CODEC_OGG aktiv / Werte=01 nicht_aktiv / Werte=00 Enable playback of video files using OGG codec
HU_CIC / HU_NBT 3000 HMI ENT_CODEC_XVID aktiv / Werte=01 nicht_aktiv / Werte=00 Enable playback of video files using XVID codec
HU_CIC / HU_NBT 3000 HMI ENT_CODEC_XVCD aktiv / Werte=01 nicht_aktiv / Werte=00 Enable playback of video files using XVCD codec
HU_CIC / HU_NBT 3000 HMI ENT_MC_VIDEO_SUPPORT aktiv / Werte=01 nicht_aktiv / Werte=00 Allows videos to be stored to the internal hard drive
HU_CIC / HU_NBT 3001 EXBOX HUD_ACTIVATION aktiv / Werte=01 nicht_aktiv / Werte=00
HU_CIC / HU_NBT 3001 EXBOX HUD_M aktiv / Werte=01 nicht_aktiv / Werte=00 Adds "M View" check box in HUD Displayed Information screen. Cannot be checked NEEDS ADDITIONAL TESTING
HU_CIC / HU_NBT 3001 EXBOX LEGAL_DISCLAIMER_TIME kein_ld ld_mit_timeout Disables iDrive legal disclaimer during iDrive startup. Change the value: ld_mit_timeout --> kein_ld
HU_CIC / HU_NBT 3001 EXBOX MACRO_CAM_LEGALDISCLAIMER kein_ld ld_mit_timeout Disables camera legal disclaimer shown on PDC and Sideview
HU_CIC / HU_NBT 3001 EXBOX MACRO_NIVICAM_LDISCLAIMER kein_ld ld_mit_timeout Disables camera legal disclaimer shown on Night Vision
HU_CIC / HU_NBT 3001 EXBOX PDC_Direction horizontal / Werte=01 vertikal / Werte=00 Togggle PDC display from vertical and horizontal
HU_CIC / HU_NBT 3001 EXBOX RDC_SAFETY aktiv / Werte=01 nicht_aktiv / Werte=00 aka RPA)? If you don't know, are you valve stems metal or rubber? If rubber, you have FTMS, which operates on tire rotaional speed and has no
HU_CIC / HU_NBT 3001 EXBOX SPEEDLIMIT_INFO aktiv / Werte=01 nicht_aktiv / Werte=00 rear-view mirror. The same camera is used for the Lane Departure Warning System (LDWS) Speed Limit Info System (SLIS), and
HU_CIC / HU_NBT 3001 EXBOX VIDEO_WATCHDOG_NIGHTVISION aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=describes whether the video watchdog is active for nightvision camera- Unknown - No Noticeable Effect
HU_CIC / HU_NBT 3001 EXBOX VIDEO_WATCHDOG_REARVIEW aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=describes whether the video watchdog is active for rearview camera - Unknown - No Noticeable Effect
HU_CIC / HU_NBT 3001 EXBOX VIDEO_WATCHDOG_SIDEVIEW aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=whether the video watchdog is active for side view cameras - Unknown - No Noticeable Effect
HU_CIC / HU_NBT 3001 EXBOX VIDEO_WATCHDOG_TOPVIEW aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=describes whether the video watchdog is active for topview cameras - Unknown - No Noticeable Effect
HU_CIC / HU_NBT 3003 API_USB_VIDEO
HU_CIC / HU_NBT 3003 TELEFON_TELEMATIK_ONLINE PIM_DRIVING_TEXT_LENGTH up_to_three_lines / up_to_three_lines ???
HU_CIC / HU_NBT 3002 AUDIO_TUNER_TRAFFIC VOL_MAX_ON standard; Werte=64 19 Last volume setting is retained.
IHKA 3000 IHKA_Codierdaten MEMORY_UMLUFT aktiv nicht_aktiv Always Remember Air Recirculating
IHKA 3000 IHKA_Codierdaten OFF_MEMORY aktiv / Werte=01 nicht_aktiv / Werte=00 A/C to remeber to stay off when you powered it off last time you turn off the car key
JBBF 3050 SeatHeating_Addition... TEMP_LEHNE_STUFE_1_FOND 90 Rear seat temperature, back, setting 1
JBBF 3050 SeatHeating_Addition... TEMP_LEHNE_STUFE_2_FOND 98 Rear seat temperature, back, setting 2
JBBF 3050 SeatHeating_Addition... TEMP_LEHNE_STUFE_3_FOND AA Rear seat temperature, back, setting 3
JBBF 3050 SeatHeating_Addition... TEMP_SITZ_STUFE_1_FOND 90 Rear seat temperature, seat, setting 1
JBBF 3050 SeatHeating_Addition... TEMP_SITZ_STUFE_2_FOND 98 Rear seat temperature, seat, setting 2
JBBF 3050 SeatHeating_Addition... TEMP_SITZ_STUFE_3_FOND AA Rear seat temperature, seat, setting 3
JBBF 3050 SeatHeating_Addition... TEMP_LEHNE_STUFE_1_FRONT 90 92 Front seat temperature, back, setting 1
JBBF 3050 SeatHeating_Addition... TEMP_LEHNE_STUFE_2_FRONT 95 98 Front seat temperature, back, setting 2
JBBF 3050 SeatHeating_Addition... TEMP_LEHNE_STUFE_3_FRONT A2 A6 Front seat temperature, back, setting 3
JBBF 3050 SeatHeating_Addition... TEMP_SITZ_STUFE_1_FRONT 90 92 Front seat temperature, seat, setting 1
JBBF 3050 SeatHeating_Addition... TEMP_SITZ_STUFE_2_FRONT 95 98 Front seat temperature, seat, setting 2
JBBF 3050 SeatHeating_Addition... TEMP_SITZ_STUFE_3_FRONT A2 A6 Front seat temperature, seat, setting 3
JBBF 3070 FH_TUER_AUF_STOP_MAUT nicht_aktiv aktiv Opening doors (REAR) will not interrupt window roll up operation. Normally, if you open a door while the window is automatically rolling up, it will stop the operation. This feature disables it. May need to wait for iDrive to reset for activation
JBBF 3080 CODDT_00_SCAL_DIM_ECR_LIN 39 20 Dim ratio of side-view mirrors based on sensor in rear-view mirror - Max 39, higher number is darker tint
JBBF 3080 CODDT_01_SCAL_DIM_ECR_LIN 39 20 Dim ratio of rear-view mirror based on sensor in rear-view mirror - Max 39, higher number is darker tint
JBBF 3530 RLS RLS_FLC_SCHWELLWERT_SATZ_1 3 Windshield wiper rain sensitivity, position 1, value from 0-15, 15 is most sensitive
JBBF 3530 RLS RLS_FLC_SCHWELLWERT_SATZ_2 7 Windshield wiper rain sensitivity, position 2, value from 0-15, 15 is most sensitive
JBBF 3530 RLS RLS_FLC_SCHWELLWERT_SATZ_3 11 (Hex=0B) Windshield wiper rain sensitivity, position 3, value from 0-15, 15 is most sensitive, values in Hex
KOMBI 3000 Anzeige Konfiguration SPA_SPORT_ENABLE aktiv / Werte=01 nicht_aktiv / Werte=00 SAT S1 though S7
KOMBI 3000 Anzeige_Konfiguration BC_DIGITAL_V aktiv / Werte=01 nicht_aktiv / Werte=00 Digital Speed in MPH is a new option in BC
KOMBI 3000 Anzeige_Konfiguration BC_V_KORREKTUR nicht_aktiv aktiv / Werte=01 real speed. Can not find BC_DIGITAL_V_KORREKTUR for correction of digital speed.
KOMBI 3000 Anzeige_Konfiguration BLINKER_HUD_ENABLE aktiv nicht_aktiv Enables Turn Signals in HUD - Use w/ HU_CIC / 3000 HMI/ HUD_TURNSIGNAL
KOMBI 3008 PIA_Einheiten HUD_PIA_BLINKER aktiv nicht_aktiv Enables Turn Signals in HUD -2013 only - use with above, HUD_TURNSIGNAL checkbox does not appear, but this works.
KOMBI 3000 Anzeige_Konfiguration HUD_START_UP_SCREEN_ANZ_ZEIT aktiv / Werte=01 nicht_aktiv / Werte=00 At the start of the HUD will appear, this screen for encoded time. In 1 s increments. 0s = no display
KOMBI 3000 Anzeige_Konfiguration R_GANG_AKUSTIK_ENABLE aktiv nicht_aktiv Enables the reverse gear gong for Japan - No Noticeable Effect
KOMBI 3000 Anzeige_Konfiguration HUD_ENTERTAINMENT aktiv nicht_aktiv Enables entertainment list in HUD
KOMBI 3000 Anzeige_Konfiguration HUD_TELEFONANRUF_ENABLE aktiv nicht_aktiv Display incoming phone information in HUD
KOMBI 3000 Anzeige_Konfiguration HUD_TELEFONBUCH_ENABLE aktiv nicht_aktiv Display recent phone information in HUD - press phone button
KOMBI 3000 Anzeige_Konfiguration HUD_SPRACHEINGABE_ENABLE aktiv nicht_aktiv Display voice command conformation information in HUD
KOMBI 3000 Anzeige_Konfiguration HINTERGRUND_FARBE_TAG grau ornage subtle orange lines at the bottom during the day. 2013 Default is grey
KOMBI 3001 Anzeige_Konfiguration HINTERGRUND_FARBE_NACHT orange or grau grau subtle orange lines at the bottom during the night.
KOMBI 3003 FZG_Ausstattung SPA_ENABLE aktiv / Werte=01 nicht_aktiv / Werte=00 maximum fuel efficency. NEEDS TO BE TESTED W/ 6MT AND ECO PRO MODE
KOMBI 3003 FZG_Ausstattung SPEED_LIMIT aktiv / Werte=01 nicht_aktiv / Werte=00 mirror. The same camera is used for the Lane Departure Warning System (LDWS) Speed Limit Info System (SLIS), and the
KOMBI 3008 PIA_Einheiten DREHMOMENT Nm / lb_ft / kgm Nm Force Sport Displays units in ft lb. - 0 - default 1 - Nm 2 - lb-ft 3 - kgm 4-15 Reserve
PDC 3009 D_SCHWELLE_1 max distance in meters to disable top camera view - Change to Werte = FF / Werte = 14 or Werte = 32
PDC 3009 D_SCHWELLE_2 max distance in meters to disable rear camera view - Change to Werte = FF / Werte = 14 or Werte = 0A
PDC 3009 V_SCHWELLE_1 max speed to disable top camera view - Change to Werte = FF / Werte = 14 or Werte = 24
PDC 3009 V_SCHWELLE_2 max speed to disable rear camera view - Change to Werte = FF / Werte = 14 or Werte = 0F
TRSVC 3000 SV_Activate_Speed_Limit initwert / Werte=0F Comment = Maximum speed at which side view may be activated. If any zero speed may be used. - Side View cameras to stay on all the time
TRSVC 3000 SV_Deactivate_Speed initwert / Werte=0F "Comment = speed above which side view will be automatically deactivated.
If zero no deactivation. - Side View cameras to stay on all the time (except reversing) - Part 2"
SM [6d] 3000 SM_GLOBAL SA_MEMORY_ZEIT Wert_15 / Werte=01 or Wert_15 / Werte=01 0: (no wake) 0 minutes;

timon16141 · 31.07.2018, 19:08

Admin, подскажите где взять список fa для f серии?

Denmgn82 · 14.12.2018, 16:29

Цитата:

Сообщение от timon16141

Admin, подскажите где взять список fa для f серии?

На БМВ клубе здесь не найдете.

Anubis666 · 20.02.2019, 13:05

Спасибо!

killerghost · 30.04.2019, 17:50

nice work

Besss777 · 02.05.2019, 00:50

Кто знает как кодировать через BimmerCode ?У меня почему-то не получается.

borg123 · 07.05.2019, 16:13

Спасибо.

Александр Игоревич · 12.09.2019, 04:48

Спасибо большое за Ваш труд и щедрость��

29.11.2014, 01:37	#2 (permalink)
Admin Админ Регистрация: 07.09.2008 Сообщений: 3,592 Вы сказали Спасибо: 267 Поблагодарили 13,621 раз(а) в 1,270 сообщениях Сказал(а) Фууу!: 28 Сказали Фууу! 0 раз(а) в 0 сообщениях Откуда: Москва Авто: Ford Fiesta	Тоже самое, только в более удобном виде, есть в приложенных файлах (см. выше): Model Module Subsection Function New value Default Description F10/F11 HKFM 3010 HKL_BEDIENUNG SCH_TOEHKI active = 01 not active = 00 Button on driver-side will be enabled to CLOSE the trunk F10/F11 HKFM 3010 HKL_BEDIENUNG SCH_FBD aktiv nicht_aktiv Button on key fob will be enabled to CLOSE the trunk F10/F11 HKFM 3010 HKL_BEDIENUNG TASTER_FBD aktiv nicht_aktiv Button on key fob will be enabled to CLOSE the trunk F10/F11 KOMBI 3000 Anzeige_Konfiguration BC_DIGITAL_V active = 01 not active = 00 Digital tacho is a new option in BC KOMBI 3000 Anzeige HUD_START_UP_SCREEN_ANZ_ZEIT At the start of the HUD will appear, this screen for encoded time. In 1 s increments. 0s = no display KOMBI 3000 Anzeige BLINKER_HUD_ENABLE F10/F11 HU_CIC 3000 HMI SPEEDLOCK_X_KMH_MIN value = FF 3_kmh = 3 or 8_kmh = 8 Disable DVD Speedlock - Part 1 F10/F11 HU_CIC 3000 HMI SPEEDLOCK_X_KMH_MAX value = FF 3_kmh = 3 or 8_kmh = 8 Disable DVD Speedlock - Part 2 F10/F11 HU_CIC 3000 HMI VIDEO_NUR_MIT_HANDBREMSE not active = 00 active = 01 Video just in combination with handbrake F10/F11 HU_CIC 3000 HMI NAVI_FUELSTOP_PROPOSAL aktiv nicht_aktiv Go to "Route Information" on iDrive when you're going somewhere and it will tell you at what point(s) along your journey you'll likely need to fill up. You can then select that notice and it will tell you about the stations in the area at that point on your trip. HU_CIC 3000 HMI L7_SURROUND_CONFIG Replaces "Surround" on/off checkbox with "L7 Surround" Slider (-5/+5) on Settings=>Tone screen HU_CIC 3000 HMI HUD_TURNSIGNAL Turn indicator in the HUD HU_CIC 3000 HMI HUD_DISTANCE_INFO I presume this is iBrake Distance for Active Cruise Control F10/F11 HU_CIC 3001 EXBOX LEGAL_DISCLAIMER_TIME kein_ld ld_mit_timeout Disables iDrive legal disclaimer during iDrive startup. Change the value: ld_mit_timeout --> kein_ld HU_CIC 3001 EXBOX MACRO_CAM_LEGALDISCLAIMER kein_id Disable legal disclaimer on PDC and Sideview Cameras F10/F11 HU_CIC 3001 EXBOX MACRO_NIVICAM_LDISCLAIMER kein_id Disable legal disclaimer on Night Vision Camera F11 ACSM 3000 Ausstattungsflags SBR_FA_GWF_SBR_FA not active = 00 active = 01 disable seat belt reminder - driver F11 ACSM 3000 Ausstattungsflags SBR_BF_GWF_SBR_BF not active = 00 active = 01 disable seat belt reminder - passenger F11 ACSM 3000 Ausstattungsflags Gurtzustandsanzeige_Fahrer_GWF_GZA_FA not active = 00 active = 01 disable seat belt status display - driver F11 ACSM 3000 Ausstattungsflags Gurtzustandsanzeige_Beifahrer_GWF_GZA_BF not active = 00 active = 01 disable seat belt status display - passenger F11 ACSM 3000 Ausstattungsflags SPW_FA not active = 00 active = 01 disable sound on disconnect SB - driver F11 ACSM 3000 Ausstattungsflags SPW_BF not active = 00 active = 01 disable sound on disconnect SB - passenger F10/F11 CAS 3002 CLM ER_KEYOUT_AUTOVR aktiv nicht_aktiv Tested with Comfort Access. Unlocks doors when engine is stopped (start/stop button is pushed). Allows single pull to open doors. F10/F11 CAS 3020 FRM SPIEGEL PARAMETER ASP_BEIKLAPPEN_B_KOMFORTSCHL aktiv nicht_aktiv Folds mirrors with long hold of lock button on key fob. Folds mirrors with long hold of door ridges on comfort access equipped vehicles. F10/F11 CAS 3003 FH MASTER KOMFORTSCHLIESSUNG_FB aktiv nicht_aktiv Closes windows + moon roof through Key Fob F10/F11 CAS 3003 FH MASTER KOMFORTSCHLIESSUNG_PA aktiv nicht_aktiv Closes windows + moon roof through comfort access F10/F11 FRM 3030 FRM FH PARAMETER FH_TUER_AUF_STOP_MAUT nicht_aktiv aktiv Opening doors will not interrupt window roll up operation. Normally, if you open a door while the window is automatically rolling up, it will stop the operation. This feature disables it. May need to wait for iDrive to reset for activation FRM 3050 FRM NSW_AUS_BEI_FL Change to nicht_aktiv to enbale Fog Lights with High Beams / Flashers FRM 3050 FRM HELLIGKEIT_FL_BIXENON High Beam Brightness in % FRM 3050 FRM HELLIGKEIT_DRL DRL Brightness in % FRM 3050 FRM DRL_MODUS 0: DRL disabled; 1: DRL_H via beam, halogen U.S. (without lights); 2: DRL_L via low beam; 3: DRL_S via separate TFLeuchte; U.S. Xenon (rings + bottom); 4: TFL_S via separate TFLeuchte; ECE Xenon (rings + bottom); 5: TFL_ECE (North Country Comfort); 6: DRL_S_ohne_SL via separate TFLeuchte without taillight / tail lights, U.S.; 7: TFL_S_ohne_SL via separate TFLeuchte without tail light / rear light, ECE FRM 3050 FRM WL_FUNKTION_NSW Welcome Lights - Fog Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) FRM 3050 FRM WL_FUNKTION_KZL License Plate Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) FRM 3050 FRM WL_FUNKTION_SSL Tail Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) FRM 3050 FRM WL_FUNKTION_POL Position Lights (Front Side LED's) - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) FRM 3050 FRM WL_FUNKTION_AL Low Beam Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) FRM 3050 FRM WL_FUNKTION_FL High Beam - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) FRM 3050 FRM WL_TIMEOUT Welcome Light: Activation time FRM 3050 FRM FOMEHO_TIMEOUT FollowMeHome: Activation time FRM 3050 FRM FLB_NSW high beam flashing: Control Fog Lights: 0: NSW inactive, 1: NSW blink as FL / TFL FRM 3050 FRM FLB_INTERMITTIEREND high beam flash: Light control on the vehicle page: 0: in-phase, 1: intermittent, left and right opposite phase IHKA 3000 IHKA_Codierdaten MEMORY_UMLUFT aktiv = always remember air recirculating bmw coding, Asup and Pavel-69 like this.

29.11.2014, 21:12	#3 (permalink)
Admin Админ Регистрация: 07.09.2008 Сообщений: 3,592 Вы сказали Спасибо: 267 Поблагодарили 13,621 раз(а) в 1,270 сообщениях Сказал(а) Фууу!: 28 Сказали Фууу! 0 раз(а) в 0 сообщениях Откуда: Москва Авто: Ford Fiesta	ACSM 3001 GWF_SBR_WARNDAUER Werte = 01 (for 1 second) wert_01 / Werte=5A Comment = duration of the SBR (Seatbelt Reminder) warnings (typically 90s) - 5A HEX = 90 Decimal ACSM 3000 Ausstattungsflags Gurtzustandsanzeige_Beifahrer_GWF_GZA_BF nicht_aktiv / Werte=00 aktiv / Werte=01 Disable seat belt status display - passenger ACSM 3000 Ausstattungsflags Gurtzustandsanzeige_Fahrer_GWF_GZA_FA nicht_aktiv / Werte=00 aktiv / Werte=01 Disable seat belt status display - driver ACSM 3000 Ausstattungsflags SBR_BF_GWF_SBR_BF nicht_aktiv / Werte=00 aktiv / Werte=01 Disable seat belt reminder - passenger ACSM 3000 Ausstattungsflags SBR_FA_GWF_SBR_FA nicht_aktiv / Werte=00 aktiv / Werte=01 Disable seat belt reminder - driver ACSM 3000 Ausstattungsflags SPW_BF nicht_aktiv / Werte=00 aktiv / Werte=01 Disable sound on disconnect SB - passenger ACSM 3000 Ausstattungsflags SPW_FA nicht_aktiv / Werte=00 aktiv / Werte=01 Disable sound on disconnect SB - driver ACSM 3000 Ausstattungsflags SeatBeltReminder_SBR_Fahrer nicht_aktiv / Werte=00 aktiv / Werte=01 Disable seat belt reminder - passenger ACSM 3000 Ausstattungsflags SeatBeltReminder_SBR_Beifahrer nicht_aktiv / Werte=00 aktiv / Werte=01 Disable seat belt reminder - driver ACSM 3000 Ausstattungsflags SBR_PreWarning_Fahrer nicht_aktiv / Werte=00 aktiv / Werte=01 Disable sound on disconnect SB - driver ACSM 3000 Ausstattungsflags SBR_PreWarning_Beifahrer nicht_aktiv / Werte=00 aktiv / Werte=01 Disable sound on disconnect SB - passenger ACSM 3000 Ausstattungsflags Initialwarnung_GWF_IW nicht_aktiv / Werte=00 aktiv / Werte=01 Disable initial seatbelt warning CAS 3000 TC TC_MSA_DEFAULT_OFF aktiv / Werte=01 nicht_aktiv / Werte=00 Turn Auto Start/Stop OFF by default CAS 3000 TC TC_MSA_MEMORY aktiv / Werte=01 nicht_aktiv / Werte=00 Sets car's Auto Start/Stop function to start in the last used setting (e.g. Off) when the engine is started CAS 3002 CLM ER_KEYOUT_AUTOVR aktiv / Werte=01 nicht_aktiv / Werte=00 Unlocks doors when engine is stopped (start/stop button is pushed). Allows single pull to open doors. CAS 3002 CLM OPEN_RSCR_WITH_REMOTE_KEY_SPFN aktiv / Werte=01 nicht_aktiv / Werte=00 Comment = Remote Key opens with a 4th button tailgate or rear window (active) CAS 3002 CLM REAR_SCREEN_IS_PRIMARY aktiv / Werte=01 nicht_aktiv / Werte=00 Comment = Remote Key opens with 3rd button tailgate or rear window (active) CAS 3002 CLM REMOTE_KEY_SPECIAL_FCT aktiv / Werte=01 nicht_aktiv / Werte=00 Button 4 (Panic Button). CAS 3003 FH MASTER KOMFORTSCHLIESSUNG_FB aktiv / Werte=01 nicht_aktiv / Werte=00 Closes mirrors + windows + moon roof through Key Fob - Requires ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN set to aktiv CAS 3003 FH MASTER KOMFORTSCHLIESSUNG_PA aktiv / Werte=01 nicht_aktiv / Werte=00 Closes mirrors + windows + moon roof through Comfort Access - Requires ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN set to aktiv CAS 3003 FH_Master KMFRT_OEFF_HINTEN wert_01 / Werte=05 Comfort opening: Delay between front and rear windows - NOT TESTED CAS 3003 FH_Master KMFRT_OEFF_SHD wert_01 / Werte=23 Comfort opening: Delay between the rear windows and SHD (Moon Roof) - NOT TESTED CAS 3003 FH_Master KMFRT_SCHL_VORNE wert_01 / Werte=05 Connect Comfort: Delay between front and rear windows- NOT TESTED - Presumed Delay on Close CAS 3003 FH_Master KOMFORT_SCHL_SHD wert_01 / Werte=23 Connect Comfort: Delay between the front windows and SHD (Moon Roof) - NOT TESTED - Presumed Delay on Close CAS 3010 HKL_BEDIENUNG USE_FBD4 aktiv / Werte=01 nicht_aktiv / Werte=00 Comment = can be the key 4 the FBD (OP_KEY_BUT_SPFN) used for the opening of the HK. This feature is currently available for F11 and F07. "CMB_MEDIA/ HU_NBT" 3001 TELEPHONE_PARAMETER INBAND_RINGING aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=The telephone ringtone is transferred to the Combox CMB_MEDIA 3001 TELEPHONE_PARAMETER RINGTONE ring_tone2 / Werte=01 or ring_tone2 / Werte=01 Kommentar=Set the Ring Tone (if no Inband Ringing is set) CMB_MEDIA 3006 TELEMATIK MY_INFO_SUPPORTED_POIS Increase CIC stored addresses/messages from 25 to 50 FRM 3020 ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN aktiv / Werte=01 nicht_aktiv / Werte=00 By itself does nothing, yet if it is not set to aktiv, neither KOMFORTSCHLIESSUNG_FB nor KOMFORTSCHLIESSUNG_PA will work, FRM 3020 ASP_BORDSTEINAUTOMATIK_DELTA Werte=5A Werte=3B 2 character hexadecimal value that determines the angle of the passenger side mirror when the car is put into reverse FRM 3030 FH_TUER_AUF_STOP_MAUT nicht_aktiv / Werte=00 aktiv / Werte=01 stop the operation. This feature disables it. May need to wait for iDrive to reset for activation FRM 3050 DRL_MODUS drl_s / Werte=03 bottom); 4: TFL_S via separate TFLeuchte; ECE Xenon (rings + bottom); 5: TFL_ECE (North Country Comfort); 6: DRL_S_ohne_SL via separate / drl_s_ohne_sl / FRM 3050 FLA_AUTO_AKTIV aktiv / Werte=01 nicht_aktiv / Werte=00 Set High Beam Assistant Defaukt to Automatic on FRM 3050 FLB_INTERMITTIEREND asynchron / Werte=01 synchron / Werte=00 Presumed to work in conjunction with FLB_NSW FRM 3050 FLB_NSW aktiv / Werte=01 nicht_aktiv / Werte=00 TESTING FRM 3050 FOMEHO_FFB_SPFN_TIMESLOT wert_01__400ms / Werte=03 0: no activation of FMH by FFB SPFN possible; 1: 300 ms; 2: 350ms, 3 400ms, 4: 450ms; FRM 3050 FOMEHO_TIMEOUT wert_01 / Werte=28 FollowMeHome: Activation time - NOT TESTED wert_01__100% / FRM 3050 HELLIGKEIT_DRL wert_03__54% / wert_01__100% / Werte=64 Daytime Running Light (DRL) Brightness in % - NOT TESTED FRM 3050 HELLIGKEIT_FL_BIXENON wert_01 / Werte=64 High Beam Brightness in % - NOT TESTED FRM 3050 NSW_AUS_BEI_FL nicht_aktiv / Werte=00 aktiv / Werte=01 Change to nicht_aktiv to enbale Fog Lights with High Beams / Flashers - Works for Some and not others - Reason Unknown FRM 3050 WL_FUNKTION_AL nicht_aktiv / Werte=00 Welcome Lights - Low Beam Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) hard_on / soft_on_LED FRM 3050 WL_FUNKTION_FL nicht_aktiv / Werte=00 Welcome Lights - High Beam - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) hard_on / soft_on_LED FRM 3050 WL_FUNKTION_KZL hard_on / Werte=02 Welcome Lights - License Plate Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) hard_on / soft_on_LED FRM 3050 WL_FUNKTION_NSW nicht_aktiv / Werte=00 Welcome Lights - Fog Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) hard_on / soft_on_LED FRM 3050 WL_FUNKTION_POL hard_on / Werte=02 Welcome Lights - Position Lights (Angel Eyes and Front Side LED's) - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) hard_on / soft_on_LED FRM 3050 WL_FUNKTION_SSL hard_on / Werte=02 Welcome Lights - Tail Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp) hard_on / soft_on_LED FRM 3050 WL_TIMEOUT wert_01 / Werte=14 Welcome Light: Activation time - NOT TESTED FRM 3050 ESS_ERSSCHEINUNGSBILD bremslicht blinkend (brake light flashing) flaechenvergroesserung (area enlargement) Brake Force Delay Option FRM 3050 ESS_ON_VERZ (default for Europe (14 dec) 10 m/s2; default for US (10 dec) 8 m/s2) Brake Force Delay Option - This refers to deceleration speed FRM 3050 ESS_GESCHW_SCHWELLE (default for Europe Werte=32 (50 dec) default for US Werte=05 (5 dec)) Brake Force Delay Option - This refers to the threshold speed for activation FRM 3090 AUSG_11_NSW_L_IS_INDICATOR aktiv / Werte=01 nicht_aktiv / Werte=00 Expected Left Fog as Turn signal - No Noticeable Effect FRM 3090 AUSG_12_NSW_R_IS_INDICATOR aktiv / Werte=01 nicht_aktiv / Werte=00 Expected Right Fog as Turn signal - No Noticeable Effect HKFM 3010 SCH_FBD aktiv / Werte=01 nicht_aktiv / Werte=00 Button on key fob will be enabled to CLOSE the trunk - Does not work immediately; Allow for some time before it begins to work. Must enable TASTER_FBD HKFM 3010 SCH_TOEHKI aktiv / Werte=01 nicht_aktiv / Werte=00 Button on driver-side will be enabled to CLOSE the trunk - Does not work immediately; Allow for some time before it begins to work HKFM 3010 TASTER_FBD aktiv / Werte=01 nicht_aktiv / Werte=00 Use w/ Above HU_CIC / HU_NBT 3000 HMI CDMM_ES_ALBUM_INFO aktiv / Werte=01 nicht_aktiv / Werte=00 Album-info on / off - No Noticeable Effect - NEEDS ADDITIONAL TESTING HU_CIC / HU_NBT 3000 HMI COMFORT_OPENING aktiv / Werte=01 nicht_aktiv / Werte=00 This adds a new option "Comfort Acess" in Settings--->door locks-->Lock Button..Works same as "All Doors" NEEDS ADDITIONAL TESTING HU_CIC / HU_NBT 3000 HMI DAYDRIVING_LIGHT standard / Werte=02 or standard / Werte=02 tick/untick this option. Useful for countries where DRL is not mandatory. HU_CIC / HU_NBT 3000 HMI EFF_DYN_SAILING aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=Scheunert Bernd EI-42 - No Noticeable Effect HU_CIC / HU_NBT 3000 HMI EFF_DYN_SPORT_CID aktiv / Werte=01 nicht_aktiv / Werte=00 even after enabling EFF_DYN_SPORT_UNIT, in which case see KOMBI / 3008 PIA_Einheiten / DREHMOMENT and LEISTUNG for HU_CIC / HU_NBT 3000 HMI EFF_DYN_SYS_CID aktiv / Werte=01 nicht_aktiv / Werte=00 "Configure ECO PRO" to the Settings=>Driving mode screen. Since there is no actual ECO PRO Functionality, as it is not part of the MY 2011 Dynamic HU_CIC / HU_NBT 3000 HMI HELLIGKEIT_AMBILIGHT Adds "Brightness” Slider (-5/+5) on Settings=>Lights Screen. Slider is non-functional Displays B & O sound menu - Removes L7 Surround Checkbox and Adds Bang & Oulfsen Menu to Settings=>Tone Screen with Studio and Expanded HU_CIC / HU_NBT 3000 HMI HIGH_END_AUDIO_MENUE volle insz kein_menue / Werte=00 Settings - Nonfunctional HU_CIC / HU_NBT 3000 HMI HUD_DISTANCE_INFO aktiv / Werte=01 nicht_aktiv / Werte=00 Enables Adapative Cruise Control iBrake Distance in HUD HU_CIC / HU_NBT 3000 HMI HUD_TURNSIGNAL aktiv / Werte=01 nicht_aktiv / Werte=00 in Settings=>Heads-Up Display to work. Check Box does NOT appear on 2013. HU_CIC / HU_NBT 3000 HMI L7_SURROUND_CONFIG aktiv / Werte=01 nicht_aktiv / Werte=00 left) and on (any setting other than full left). HU_CIC / HU_NBT 3000 HMI LOGIC7_SYMBOL aktiv / Werte=01 nicht_aktiv / Werte=00 Screen. HU_CIC / HU_NBT 3000 HMI M_DIGITAL_TACHO aktiv / Werte=01 nicht_aktiv / Werte=00 and with HUD HU_CIC / HU_NBT 3000 HMI M_DIGITAL_TACHO_EINH aktiv / Werte=01 nicht_aktiv / Werte=00 NEEDS ADDITIONAL TESTING and with HUD HU_CIC / HU_NBT 3000 HMI M_KEY_SETTINGS aktiv / Werte=01 nicht_aktiv / Werte=00 M key settings available - No Noticeable Effect - NEEDS ADDITIONAL TESTING HU_CIC / HU_NBT 3000 HMI MDRIVE aktiv / Werte=01 nicht_aktiv / Werte=00 "M dynamic driving syst." checkbox on Settings=>Info Display screen. When checked it completely turns off the dashboard tachometer Efficient HU_CIC / HU_NBT 3000 HMI MOMENTDISTRIBUTION_MENU aktiv / Werte=01 nicht_aktiv / Werte=00 Adds menu for xDrive Torque Distribution - NOT TESTED HU_CIC / HU_NBT 3000 HMI NAVI_DEST_EXPORT aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=Memorized Point Export feature (via USB) is coded or not (Asia only) HU_CIC / HU_NBT 3000 HMI NAVI_DEST_IMPORT aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=Memorized Point Import feature (via USB) is coded or not (Asia only) HU_CIC / HU_NBT 3000 HMI NAVI_FUELSTOP_PROPOSAL aktiv / Werte=01 nicht_aktiv / Werte=00 "You can then select that notice and it will tell you about the stations in the area at that point on your trip. Active by default on 2013" HU_CIC / HU_NBT 3000 HMI NAVI_FULL_GUIDINGPOPUP aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=(This descibes whether the arrow popups are available in the main map window.) HU_CIC / HU_NBT 3000 HMI NAVI_MAP_ARROWVIEW aktiv / Werte=01 nicht_aktiv / Werte=00 views HU_CIC / HU_NBT 3000 HMI NAVI_MYPOI_EXPORT aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=TMyPOI Export feature (via USB) is coded or not (not for Asia) HU_CIC / HU_NBT 3000 HMI NAVI_MYPOI_IMPORT aktiv / Werte=01 nicht_aktiv / Werte=00 Button=>Map HU_CIC / HU_NBT 3000 HMI NAVI_RNC_MAINMAP_TEXT permanent / Werte=FF Kommentar=Describes, whether and how long the RNC infotext shall be shown on map 10_sekunden HU_CIC / HU_NBT 3000 HMI NAVI_ROAD_PREVIEW aktiv / Werte=01 nicht_aktiv / Werte=00 Road preview is possible or not HU_CIC / HU_NBT 3000 HMI NAVI_ROUTE_RECORD aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=Route record features are coded or not HU_CIC / HU_NBT 3000 HMI NAVI_SPLIT_GUIDINGPOPUP nicht_aktiv / Werte=00 aktiv / Werte=01 Kommentar=(This descibes whether the arrow popups are available in the splitscreen.) HU_CIC / HU_NBT 3000 HMI NAVI_TRIP_EXPORT aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=Trip Export feature (via USB) is coded or not HU_CIC / HU_NBT 3000 HMI NAVI_TRIP_IMPORT aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=Trip Import feature (via USB) is coded or not - "Import trip (USB)" to Navigation=>Stored trips HU_CIC / HU_NBT 3000 HMI NOTEPAD aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=Notepad available - No Noticeable Effect HU_CIC / HU_NBT 3000 HMI RSE_BRIGHTNESS aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=enable RSE brightness - No Noticeable Effect HU_CIC / HU_NBT 3000 HMI SPEEDLOCK_X_KMH_MAX value = FF (change the Werte value to FF) 3_kmh = 3 or 8_kmh = 8 Disable DVD Speedlock - Part 2 HU_CIC / HU_NBT 3000 HMI SPEEDLOCK_X_KMH_MIN value = FF (change the Werte value to FF) 3_kmh = 3 or 8_kmh = 8 Disable DVD Speedlock - Part 1 HU_CIC / HU_NBT 3000 HMI "VIDEO_NUR_MIT_HANDBREMSE/ VIDEO_HANDBRAKE" nicht_aktiv / Werte=00 aktiv / Werte=01 Video just in combination with handbrake. Use w/ above SPEEDLOCK_X_KMH_MIN and SPEEDLOCK_X_KMH_MAX. HU_CIC / HU_NBT 3000 HMI ENT_CODEC_OGG aktiv / Werte=01 nicht_aktiv / Werte=00 Enable playback of video files using OGG codec HU_CIC / HU_NBT 3000 HMI ENT_CODEC_XVID aktiv / Werte=01 nicht_aktiv / Werte=00 Enable playback of video files using XVID codec HU_CIC / HU_NBT 3000 HMI ENT_CODEC_XVCD aktiv / Werte=01 nicht_aktiv / Werte=00 Enable playback of video files using XVCD codec HU_CIC / HU_NBT 3000 HMI ENT_MC_VIDEO_SUPPORT aktiv / Werte=01 nicht_aktiv / Werte=00 Allows videos to be stored to the internal hard drive HU_CIC / HU_NBT 3001 EXBOX HUD_ACTIVATION aktiv / Werte=01 nicht_aktiv / Werte=00 HU_CIC / HU_NBT 3001 EXBOX HUD_M aktiv / Werte=01 nicht_aktiv / Werte=00 Adds "M View" check box in HUD Displayed Information screen. Cannot be checked NEEDS ADDITIONAL TESTING HU_CIC / HU_NBT 3001 EXBOX LEGAL_DISCLAIMER_TIME kein_ld ld_mit_timeout Disables iDrive legal disclaimer during iDrive startup. Change the value: ld_mit_timeout --> kein_ld HU_CIC / HU_NBT 3001 EXBOX MACRO_CAM_LEGALDISCLAIMER kein_ld ld_mit_timeout Disables camera legal disclaimer shown on PDC and Sideview HU_CIC / HU_NBT 3001 EXBOX MACRO_NIVICAM_LDISCLAIMER kein_ld ld_mit_timeout Disables camera legal disclaimer shown on Night Vision HU_CIC / HU_NBT 3001 EXBOX PDC_Direction horizontal / Werte=01 vertikal / Werte=00 Togggle PDC display from vertical and horizontal HU_CIC / HU_NBT 3001 EXBOX RDC_SAFETY aktiv / Werte=01 nicht_aktiv / Werte=00 aka RPA)? If you don't know, are you valve stems metal or rubber? If rubber, you have FTMS, which operates on tire rotaional speed and has no HU_CIC / HU_NBT 3001 EXBOX SPEEDLIMIT_INFO aktiv / Werte=01 nicht_aktiv / Werte=00 rear-view mirror. The same camera is used for the Lane Departure Warning System (LDWS) Speed Limit Info System (SLIS), and HU_CIC / HU_NBT 3001 EXBOX VIDEO_WATCHDOG_NIGHTVISION aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=describes whether the video watchdog is active for nightvision camera- Unknown - No Noticeable Effect HU_CIC / HU_NBT 3001 EXBOX VIDEO_WATCHDOG_REARVIEW aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=describes whether the video watchdog is active for rearview camera - Unknown - No Noticeable Effect HU_CIC / HU_NBT 3001 EXBOX VIDEO_WATCHDOG_SIDEVIEW aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=whether the video watchdog is active for side view cameras - Unknown - No Noticeable Effect HU_CIC / HU_NBT 3001 EXBOX VIDEO_WATCHDOG_TOPVIEW aktiv / Werte=01 nicht_aktiv / Werte=00 Kommentar=describes whether the video watchdog is active for topview cameras - Unknown - No Noticeable Effect HU_CIC / HU_NBT 3003 API_USB_VIDEO HU_CIC / HU_NBT 3003 TELEFON_TELEMATIK_ONLINE PIM_DRIVING_TEXT_LENGTH up_to_three_lines / up_to_three_lines ??? HU_CIC / HU_NBT 3002 AUDIO_TUNER_TRAFFIC VOL_MAX_ON standard; Werte=64 19 Last volume setting is retained. IHKA 3000 IHKA_Codierdaten MEMORY_UMLUFT aktiv nicht_aktiv Always Remember Air Recirculating IHKA 3000 IHKA_Codierdaten OFF_MEMORY aktiv / Werte=01 nicht_aktiv / Werte=00 A/C to remeber to stay off when you powered it off last time you turn off the car key JBBF 3050 SeatHeating_Addition... TEMP_LEHNE_STUFE_1_FOND 90 Rear seat temperature, back, setting 1 JBBF 3050 SeatHeating_Addition... TEMP_LEHNE_STUFE_2_FOND 98 Rear seat temperature, back, setting 2 JBBF 3050 SeatHeating_Addition... TEMP_LEHNE_STUFE_3_FOND AA Rear seat temperature, back, setting 3 JBBF 3050 SeatHeating_Addition... TEMP_SITZ_STUFE_1_FOND 90 Rear seat temperature, seat, setting 1 JBBF 3050 SeatHeating_Addition... TEMP_SITZ_STUFE_2_FOND 98 Rear seat temperature, seat, setting 2 JBBF 3050 SeatHeating_Addition... TEMP_SITZ_STUFE_3_FOND AA Rear seat temperature, seat, setting 3 JBBF 3050 SeatHeating_Addition... TEMP_LEHNE_STUFE_1_FRONT 90 92 Front seat temperature, back, setting 1 JBBF 3050 SeatHeating_Addition... TEMP_LEHNE_STUFE_2_FRONT 95 98 Front seat temperature, back, setting 2 JBBF 3050 SeatHeating_Addition... TEMP_LEHNE_STUFE_3_FRONT A2 A6 Front seat temperature, back, setting 3 JBBF 3050 SeatHeating_Addition... TEMP_SITZ_STUFE_1_FRONT 90 92 Front seat temperature, seat, setting 1 JBBF 3050 SeatHeating_Addition... TEMP_SITZ_STUFE_2_FRONT 95 98 Front seat temperature, seat, setting 2 JBBF 3050 SeatHeating_Addition... TEMP_SITZ_STUFE_3_FRONT A2 A6 Front seat temperature, seat, setting 3 JBBF 3070 FH_TUER_AUF_STOP_MAUT nicht_aktiv aktiv Opening doors (REAR) will not interrupt window roll up operation. Normally, if you open a door while the window is automatically rolling up, it will stop the operation. This feature disables it. May need to wait for iDrive to reset for activation JBBF 3080 CODDT_00_SCAL_DIM_ECR_LIN 39 20 Dim ratio of side-view mirrors based on sensor in rear-view mirror - Max 39, higher number is darker tint JBBF 3080 CODDT_01_SCAL_DIM_ECR_LIN 39 20 Dim ratio of rear-view mirror based on sensor in rear-view mirror - Max 39, higher number is darker tint JBBF 3530 RLS RLS_FLC_SCHWELLWERT_SATZ_1 3 Windshield wiper rain sensitivity, position 1, value from 0-15, 15 is most sensitive JBBF 3530 RLS RLS_FLC_SCHWELLWERT_SATZ_2 7 Windshield wiper rain sensitivity, position 2, value from 0-15, 15 is most sensitive JBBF 3530 RLS RLS_FLC_SCHWELLWERT_SATZ_3 11 (Hex=0B) Windshield wiper rain sensitivity, position 3, value from 0-15, 15 is most sensitive, values in Hex KOMBI 3000 Anzeige Konfiguration SPA_SPORT_ENABLE aktiv / Werte=01 nicht_aktiv / Werte=00 SAT S1 though S7 KOMBI 3000 Anzeige_Konfiguration BC_DIGITAL_V aktiv / Werte=01 nicht_aktiv / Werte=00 Digital Speed in MPH is a new option in BC KOMBI 3000 Anzeige_Konfiguration BC_V_KORREKTUR nicht_aktiv aktiv / Werte=01 real speed. Can not find BC_DIGITAL_V_KORREKTUR for correction of digital speed. KOMBI 3000 Anzeige_Konfiguration BLINKER_HUD_ENABLE aktiv nicht_aktiv Enables Turn Signals in HUD - Use w/ HU_CIC / 3000 HMI/ HUD_TURNSIGNAL KOMBI 3008 PIA_Einheiten HUD_PIA_BLINKER aktiv nicht_aktiv Enables Turn Signals in HUD -2013 only - use with above, HUD_TURNSIGNAL checkbox does not appear, but this works. KOMBI 3000 Anzeige_Konfiguration HUD_START_UP_SCREEN_ANZ_ZEIT aktiv / Werte=01 nicht_aktiv / Werte=00 At the start of the HUD will appear, this screen for encoded time. In 1 s increments. 0s = no display KOMBI 3000 Anzeige_Konfiguration R_GANG_AKUSTIK_ENABLE aktiv nicht_aktiv Enables the reverse gear gong for Japan - No Noticeable Effect KOMBI 3000 Anzeige_Konfiguration HUD_ENTERTAINMENT aktiv nicht_aktiv Enables entertainment list in HUD KOMBI 3000 Anzeige_Konfiguration HUD_TELEFONANRUF_ENABLE aktiv nicht_aktiv Display incoming phone information in HUD KOMBI 3000 Anzeige_Konfiguration HUD_TELEFONBUCH_ENABLE aktiv nicht_aktiv Display recent phone information in HUD - press phone button KOMBI 3000 Anzeige_Konfiguration HUD_SPRACHEINGABE_ENABLE aktiv nicht_aktiv Display voice command conformation information in HUD KOMBI 3000 Anzeige_Konfiguration HINTERGRUND_FARBE_TAG grau ornage subtle orange lines at the bottom during the day. 2013 Default is grey KOMBI 3001 Anzeige_Konfiguration HINTERGRUND_FARBE_NACHT orange or grau grau subtle orange lines at the bottom during the night. KOMBI 3003 FZG_Ausstattung SPA_ENABLE aktiv / Werte=01 nicht_aktiv / Werte=00 maximum fuel efficency. NEEDS TO BE TESTED W/ 6MT AND ECO PRO MODE KOMBI 3003 FZG_Ausstattung SPEED_LIMIT aktiv / Werte=01 nicht_aktiv / Werte=00 mirror. The same camera is used for the Lane Departure Warning System (LDWS) Speed Limit Info System (SLIS), and the KOMBI 3008 PIA_Einheiten DREHMOMENT Nm / lb_ft / kgm Nm Force Sport Displays units in ft lb. - 0 - default 1 - Nm 2 - lb-ft 3 - kgm 4-15 Reserve PDC 3009 D_SCHWELLE_1 max distance in meters to disable top camera view - Change to Werte = FF / Werte = 14 or Werte = 32 PDC 3009 D_SCHWELLE_2 max distance in meters to disable rear camera view - Change to Werte = FF / Werte = 14 or Werte = 0A PDC 3009 V_SCHWELLE_1 max speed to disable top camera view - Change to Werte = FF / Werte = 14 or Werte = 24 PDC 3009 V_SCHWELLE_2 max speed to disable rear camera view - Change to Werte = FF / Werte = 14 or Werte = 0F TRSVC 3000 SV_Activate_Speed_Limit initwert / Werte=0F Comment = Maximum speed at which side view may be activated. If any zero speed may be used. - Side View cameras to stay on all the time TRSVC 3000 SV_Deactivate_Speed initwert / Werte=0F "Comment = speed above which side view will be automatically deactivated. If zero no deactivation. - Side View cameras to stay on all the time (except reversing) - Part 2" SM [6d] 3000 SM_GLOBAL SA_MEMORY_ZEIT Wert_15 / Werte=01 or Wert_15 / Werte=01 0: (no wake) 0 minutes; bmw coding and Pavel-69 like this.

31.07.2018, 19:08	#4 (permalink)
timon16141 Участник тусовки Регистрация: 26.07.2013 Сообщений: 194 Вы сказали Спасибо: 14 Поблагодарили 15 раз(а) в 14 сообщениях Сказал(а) Фууу!: 0 Сказали Фууу! 1 раз в 1 сообщении Откуда: г. Абакан Авто: БМВ Х5	Admin, подскажите где взять список fa для f серии?

20.02.2019, 13:05	#6 (permalink)
Anubis666 Новичок Регистрация: 20.02.2019 Сообщений: 18 Вы сказали Спасибо: 0 Поблагодарили 1 раз в 1 сообщении Сказал(а) Фууу!: 0 Сказали Фууу! 4 раз(а) в 4 сообщениях Откуда: Россия	Спасибо!

30.04.2019, 17:50	#7 (permalink)
killerghost Новичок Регистрация: 12.03.2019 Сообщений: 26 Вы сказали Спасибо: 11 Поблагодарили 0 раз(а) в 0 сообщениях Сказал(а) Фууу!: 0 Сказали Фууу! 2 раз(а) в 2 сообщениях Откуда: libya Авто: kia	nice work

02.05.2019, 00:50	#8 (permalink)
Besss777 Новичок Регистрация: 10.01.2017 Сообщений: 1 Вы сказали Спасибо: 1 Поблагодарили 0 раз(а) в 0 сообщениях Сказал(а) Фууу!: 0 Сказали Фууу! 0 раз(а) в 0 сообщениях Откуда: Земля Авто: Honda	Кто знает как кодировать через BimmerCode ?У меня почему-то не получается.

07.05.2019, 16:13	#9 (permalink)
borg123 Новичок Регистрация: 04.07.2018 Сообщений: 50 Вы сказали Спасибо: 5 Поблагодарили 9 раз(а) в 6 сообщениях Сказал(а) Фууу!: 0 Сказали Фууу! 1 раз в 1 сообщении Откуда: Croatia Авто: A4 B8.5	Спасибо.

12.09.2019, 04:48	#10 (permalink)
Александр Игоревич Новичок Регистрация: 23.02.2019 Сообщений: 1 Вы сказали Спасибо: 0 Поблагодарили 0 раз(а) в 0 сообщениях Сказал(а) Фууу!: 0 Сказали Фууу! 0 раз(а) в 0 сообщениях Откуда: РК Авто: F07	Спасибо большое за Ваш труд и щедрость��