|
Диагностика Ford / Mazda | ремонт электроники Все вопросы, касающиеся диагностики и ремонта электроники автомобилей Ford / Mazda. Работа со сканерами Ford VCM, FORD VCM II и т.п. Установка и настройка VCM IDS. |
|
LinkBack | Опции темы | Поиск в этой теме | Опции просмотра |
03.01.2023, 12:33 | #1 (permalink) |
Новичок
Регистрация: 27.10.2022
Сообщений: 43
Вы сказали Спасибо: 0
Поблагодарили 1 раз в 1 сообщении
Сказал(а) Фууу!: 0
Сказали Фууу! 13 раз(а) в 12 сообщениях
Откуда: Waynesboro,MS,United/States
|
How to Disable Ford Focus Automatic Door Lock by Yourself
Procedures:
Step 1 Confirm that the perimeter alarm is disarmed. / Step 2 Close all doors. / Step 3 Confirm that the ignition switch is in the OFF position. / Step 4 Turn the ignition switch from OFF to RUN. / Step 5 Press the power door lock UNLOCK button three times. / Step 6 Turn the ignition switch from RUN to OFF. / Step 7 Press the power door lock UNLOCK button three times. / Step 8 Turn the ignition switch from OFF to RUN. / Step 9 Verify that the RAP module chirps the horn. This indicates that the RAP module is now in the enable/disable mode and ready to accept program changes. / Step 10 Press the power door lock UNLOCK button one time to command the RAP module to toggle the autolock/relock feature ON or OFF. / Step 11 Press the power door lock LOCK button once to enter the command. / Step 12 Verify that the vehicle horn chirps one time to signal the RAP module confirmation of the command. There should only be one chirp indicating that the autolock/relock feature has been disabled. If one chirp is heard, followed by a longer honk, the autolock/relock feature has just been enabled. Return to step 10. / Step 13 Turn the ignition switch to the OFF position to exit the enable/disable mode. / Step 14 Verify that the RAP module chirps the horn once to indicate that a feature has been changed. For more information, please follow Done! |
|
|