Procedures:
Step 1
Confirm that the perimeter alarm is disarmed.
/
Step 2
Close all doors.
/
Step 3
Confirm that the ignition switch is in the OFF position.
/
Step 4
Turn the ignition switch from OFF to RUN.
/
Step 5
Press the power door lock UNLOCK button three times.
/
Step 6
Turn the ignition switch from RUN to OFF.
/
Step 7
Press the power door lock UNLOCK button three times.
/
Step 8
Turn the ignition switch from OFF to RUN.
/
Step 9
Verify that the RAP module chirps the horn. This indicates that the RAP module is now in the enable/disable mode and ready to accept program changes.
/
Step 10
Press the power door lock UNLOCK button one time to command the RAP module to toggle the autolock/relock feature ON or OFF.
/
Step 11
Press the power door lock LOCK button once to enter the command.
/
Step 12
Verify that the vehicle horn chirps one time to signal the RAP module confirmation of the command. There should only be one chirp indicating that the autolock/relock feature has been disabled. If one chirp is heard, followed by a longer honk, the autolock/relock feature has just been enabled. Return to step 10.
/
Step 13
Turn the ignition switch to the OFF position to exit the enable/disable mode.
/
Step 14
Verify that the RAP module chirps the horn once to indicate that a feature has been changed.
For more information, please follow
https://www.obd2.ltd
Done!