|
Чип-тюнинг Любые вопросы, связанные с чип-тюнингом. Дампы, прошивки. Увеличение мощности, удаление DPF / FAP / EGR и т.п. |
|
LinkBack | Опции темы | Поиск в этой теме | Опции просмотра |
![]() |
#11 (permalink) |
Админ
Регистрация: 07.09.2008
Сообщений: 3,601
Вы сказали Спасибо: 267
Поблагодарили 13,784 раз(а) в 1,272 сообщениях
Сказал(а) Фууу!: 28
Сказали Фууу! 0 раз(а) в 0 сообщениях
Откуда: Москва
Авто: Ford Fiesta
|
![]()
Может, кому пригодится....
for those who wondered what the small black box with the led, switch and alligator clips is used for i just did some research: the big red alligator clip supplies +12v to the Kess main unit on pin 12 of the 25pins male D-connector; +12v is wired trough a 1N4001 diode to the switch which powers the led trough a 2K2 resistor and supplies the blue/white/orange/yellow and red wire with +12v (switched output). the big black alligator clip supplies GND to the Kess main unit on pin 24 of the male D-connector; it also connects to the LED (negative) and to the gray wire and the small black alligator clip (GND) the K-line is connected to pin 10 of the male D-connector and to the green wire. So Basically it uses only 3 pins of the Kess main unit (+12v, GND and K-line) and it outputs 5x switched +12v (blue,white,orange,yellow and red) , 2x GND (gray and small black crocodile clip) and 1x K-line (green). |
![]() |
![]() |
Метки |
kess v2, программатор kess |
|
|