| Headmost |
25.10.2020 16:43 |
Возможно будет полезна ещё одна инструкция по активации распознавания дорожных знаков.
Цитата:
Activate Sign Assist
STG17 coding: Byte 05, Bit 2(Sign assist installed)
STG A5 coding: Byte 01, Bit 0 (Sign assist active)
Byte 16, Bit 4 (Sign assist active)
STG 5F adaptation: Car_Function_List_BAP_traffic_sign_recognition_0x2 1, activated
Car_Function_Adaptations_Gen2-menu_display_road_sign_identification, activated
Car_Function_Adaptations_Gen2-menu_display_road_sign_identification_over_thresho ld_high, activated
STG 82Head Up Display coding: Byte 00, Bit 0
If an error is stored in the Modul 13 (data bus), the following must be coded:
STG 13 ACC coding: Byte 01, Bit 0
Using VCDS, I've tried coding, un-coding, re-coding, switching individual setting, rebooting, etc; just can’t get Traffic Sign Recognition (TSR) to work. All I get is “Error - Dynamic road sign display” and “No road signs available” messages on the digital cockpit display - so I restored the original coding. But now, like others have written, the Speed Limit Signs are now missing from the main Nav screen. I have the 3Q0-980-654-A camera installed in my Atlas SEL, the same setup others MQB posters have said works; but so far, not for me, maybe someone has the solution or will share their scans of a working system. Here’s what I tried…
Address 5F Adaptations:
1. Car_Function_List_BAP_Gen2-traffic_sign_recognition_0x21 (activated)
2. Car_Function_Adaptations_Gen2-menu_display_road_sign_identification (activated)
3. Car_Function_Adaptations_Gen2-menu_display_road_sign_identification_over_thresho ld_high – (activated and not activated)
Address 5F Long Coding:
4. Byte 24, Bit 6 >byte_24_ vza,0=not activated / 1=activated (activated and not activated)
Address A5 Long Coding:
5. Security Code 20103 >Byte 16, Bit 4 >VZE,0=not coded*/ 1=coded (coded and not coded)
Address 17 Long Coding:
6. Byte 5, Bit 2 >Road sign detection.Yes (activated and not activated)
Address A5 Adaptation:
7. Road sign detection fusion mode > “Road sign detection” and “Road sign fusion”
8. Reboot, reboot, reboot...
Thank you everyone, I do appreciate your input. I’ll be sure to post any updates going forward.
TW
P.S. What’s the solution for getting the original traffic signs back on the main display…anybody?
|
----------
Цитата:
Сообщение от barik75
(Сообщение 984256)
Всем доброго времени.Подскажите пожалуйста. Адаптер приобрёл Одиса сервис поставил, Инженера вроде так же(только активировать надо, что бы время назад не откидывать). К кому можно обратится, что бы круиз активировали, самому Васей не выходит, говорят что нужно как то удалённо, чпрошивать.
|
Привет! О каком круизе идёт речь? Обычный или адаптивный? |
