Добро пожаловать на форум по автодиагностике, автосканерам! Чтобы общаться на форуме и получить доступ к информации, пожалуйста, зарегистрируйтесь!









Автосканеры, оборудование для диагностики


Вернуться   Форум по автодиагностике, автосканерам, ремонту, обслуживанию и эксплуатации автомобилей > Renault > Диагностика Renault | ремонт электроники
Расширенный поиск

Диагностика Renault | ремонт электроники Обмен опытом в диагностика Renault и ремонте любых ЭБУ. Также здесь обсуждаем нюансы работы со сканером Renault Can Clip.

RENAULT ECU decoder


Like Tree1Likes

 
 
LinkBack Опции темы Поиск в этой теме Опции просмотра
Старый 03.01.2014, 19:26   #1 (permalink)
Админ
 
Аватар для Admin
 
Регистрация: 07.09.2008
Сообщений: 3,601
Вы сказали Спасибо: 267
Поблагодарили 13,776 раз(а) в 1,272 сообщениях
Сказал(а) Фууу!: 28
Сказали Фууу! 0 раз(а) в 0 сообщениях
Откуда: Москва
Авто: Ford Fiesta
По умолчанию RENAULT ECU decoder

RENAULT ECU decoder

From the year 1994 most Renault cars are equipped with engine immobilizer system and it makes replacement of injection computer more complicated. There is no problem if replacement ECU is bought from Renault service dealer - it is sold with no immobilizer code stored, but replacing damaged computer with used one is impossible because of mismatch of unlocking codes. Decoding tool has several modes of operation and deals with all known petrol and diesel injection systems, introduced in range of year 1994-2001 without intervention in to the ECU (diesel coded anti-start valve as well). After decoding process is completed, control unit became de coded - as it was bought from dealer. ECU must be taken out from the car and connected to the decoding tool according to user manual.

Systems this tool was tested with:
Petrol Diesel
SIEMENS FENIX3 BOSCH MSA15.5 (DTI)
SIEMENS FENIX3 BOSCH MSA15.5 (DTI)
SIEMENS FENIX5 BOSCH EDC15C3 (DCI)
SIEMENS SIRIUS32 LUCAS DCU3R (1.9D)
SAGEM SAFIR (55pin) Coded fuel cut-off valve (1.9D DDS)
SAGEM SAFIR2 (35pin)
BOSCH MOTRONIC MP7.0
MAGNETI MARELLI IAW 06R

Decoding of engine control units manufactured in range of year 1994-1996 is semi-automatic, from year 1996 - fully automated. Especially this tool can be useful when rubber-filled FENIX5, SAFIR2 or coded diesel anti-start valve must be decoded. This tool will decode all listed type 1 and 2 immobilizer systems.. Buying this tool you will be supplied with all required information: user manual and connection diagrams. Decoding tool is stand-alone, no PC is required. The following ECU’s will need a valid immo code: Some of FENIX5 for LAGUNA/SAFRANE 2.0l 16V All of SIRIUS32 except for KANGOO 1.4l 16V - You can attach the immo emulator on this ECU after decoding LUCAS DCU3R, Bosch MSA15.5 and EDC15C3 This means that after the decoding procedure on one of these ECU is done, you must have the immobilizer system fully operational (matching key) to start the engine. Otherwise after decoding the above ECU’s you can use a Renault emulator.

По данному девайсу можно общаться тут.
Admin вне форума   Ответить с цитированием
Сказал Спасибо Admin за это сообщение:
dzt45539 (28.11.2019)
 





Опции темы Поиск в этой теме
Поиск в этой теме:

Расширенный поиск
Опции просмотра

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.
Trackbacks are Вкл.
Pingbacks are Вкл.
Refbacks are Вкл.



Текущее время: 11:36. Часовой пояс GMT +3.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc. Перевод:
zCarot
Автодиагностика и автосканеры.