Всё заработало Всем большое спасибо

Bendix® VCP package for Tech Tool 2.7.116

you can Download :

The Bendix® VCP installation can be found on the Trucks Dealer Portal ([Ссылки могут видеть только зарегистрированные пользователи. Зарегистрироваться...]) website.


or from here:

[Ссылки могут видеть только зарегистрированные пользователи. Зарегистрироваться...]

:wave:

jozek7, Здравствуйте. Нет запускае Step 7: Run Premium Tech Tool key emulators 2.8.xx.exe

Gaer

check @mail !!!!

:wave:

indirme link için password nedir ?

Hello. I have some troubles with tests and calibrationa. Everytime I try to do test or calibration I get errors like that.
I'm using vocom ....0300 + ptt2.7.116 + FH (4) euro6.
Any ideas what is wrong here?
Thank you

https://i.ibb.co/SxcQ2Z1/20210803-123416.jpg

https://i.ibb.co/KbDJvcS/20210805-185056.jpg

https://i.ibb.co/r2pNR2C/20210803-124130.jpg

Domas

The errors are caused by MANY different things.

__Bad install of PTT.

__The connector is bad. IE Vocom, Wrong drivers, bad cable, bad USB on the computer.

__ELD connected to the truck.

__The cache is full on PTT and needs to be deleted.

__ You need to shut the truck down. Disconnect the batteries (make sure they are ALL GOOD TOO). Disconnect the interface adaptor and shut down the computer. Restart. WAIT!!! reconnect the interface. Wait for PTT to find the interface. Connect to the truck and WAIT. Some trucks are slow.

___ Blown fuse

___The truck harness is bad

__an update to PTT was missing parts of it.

itd......

:wave:

Здравствуйте подскажите ошибка PAR15004 при программировании Уровня сажи tech tool 2.7.116

jozek7, Добрый вечер. также, как и Gaer застрял на Step 7: Run Premium Tech Tool key emulators 2.8.xx.exe - не запускается.

Thank you for reply.

It works fine with euro4. These and similar errors come with all euro6 trucks I have. It means that many different things does not fit my situation. I can't get it what could be wrong here :shock:

What is ELD?