Инструкции по работе в Mercedes DAS / Xentry

Admin · 03.12.2014, 00:16

Flash rear brake lights under panic braking:

Control units> Body> rear SAM> Control Unit Adaptations> Flashing Brake> Active

Chirp on lock/unlock (Same as Netherland settings in previous post)

Control Units for multiple items>Body> Control Unit Adaptations> Security/Alarm> National ATA> Select Netherlands

On R172.447 - Control Unit View > Information and communication > IC Instrument Cluster > Adaptations > Configuration/Manual/Settings/Current Menu Settings > Acoustic Lock Feedback - ON
Note - This setting is also available directly in the Intrument Cluster using the steering wheel controls, no DAS/Xentry needed

Fan-on temp lower

Control Units> Drive> Engine> Control Unit Adaptations> Correction Programming> Suction Fan> Temp increase to max of 10 degrees C.

and

FUEL OCTANE SETTING STAR DAS Tips and Tricks - MBWorld.org Forums

Heres one that MAY have a positive performance impact, or may not.

Control Units > Drive > Motor Electronics > F3 ( to clear the nag warning ) > Control unit adaptations > Correction Programming > Ignition

You get 4 choice of minimum octane rating ( probably get more if you can get Variant Coding to change from USA to Rest Of World or Euro )
Baseline ( 87?)
89
91
93

I suspect setting a higher octane rating will allow a bit more initial ignition advance.

FUEL REMAINING STAR DAS Tips and Tricks - MBWorld.org Forums (Same as Gas Tank Mod in previous post)

In STAR go to MAIN GROUPS page
select "control Units"
then "Information and Communication"
then "ICM- Instrument cluster with maint interval display"
then "Control Unit Adaptations"
then "Variant Coding"
then "Codings specific for the instrument cluster"
look for " Trip computer fuel tank level display"
Select that. set to ACTIVE
F3
F5
F3

03.12.2014, 00:16	#2 (permalink)
Admin Админ Регистрация: 07.09.2008 Сообщений: 3,601 Вы сказали Спасибо: 267 Поблагодарили 13,779 раз(а) в 1,272 сообщениях Сказал(а) Фууу!: 28 Сказали Фууу! 0 раз(а) в 0 сообщениях Откуда: Москва Авто: Ford Fiesta	Flash rear brake lights under panic braking: Control units> Body> rear SAM> Control Unit Adaptations> Flashing Brake> Active Chirp on lock/unlock (Same as Netherland settings in previous post) Control Units for multiple items>Body> Control Unit Adaptations> Security/Alarm> National ATA> Select Netherlands On R172.447 - Control Unit View > Information and communication > IC Instrument Cluster > Adaptations > Configuration/Manual/Settings/Current Menu Settings > Acoustic Lock Feedback - ON Note - This setting is also available directly in the Intrument Cluster using the steering wheel controls, no DAS/Xentry needed Fan-on temp lower Control Units> Drive> Engine> Control Unit Adaptations> Correction Programming> Suction Fan> Temp increase to max of 10 degrees C. and FUEL OCTANE SETTING STAR DAS Tips and Tricks - MBWorld.org Forums Heres one that MAY have a positive performance impact, or may not. Control Units > Drive > Motor Electronics > F3 ( to clear the nag warning ) > Control unit adaptations > Correction Programming > Ignition You get 4 choice of minimum octane rating ( probably get more if you can get Variant Coding to change from USA to Rest Of World or Euro ) Baseline ( 87?) 89 91 93 I suspect setting a higher octane rating will allow a bit more initial ignition advance. FUEL REMAINING STAR DAS Tips and Tricks - MBWorld.org Forums (Same as Gas Tank Mod in previous post) In STAR go to MAIN GROUPS page select "control Units" then "Information and Communication" then "ICM- Instrument cluster with maint interval display" then "Control Unit Adaptations" then "Variant Coding" then "Codings specific for the instrument cluster" look for " Trip computer fuel tank level display" Select that. set to ACTIVE F3 F5 F3 Goover and vologir666 like this.