Flash rear brake lights under panic braking:
Control units> Body> rear SAM> Control Unit Adaptations> Flashing Brake> Active
Chirp on lock/unlock (Same as Netherland settings in previous post)
Control Units for multiple items>Body> Control Unit Adaptations> Security/Alarm> National ATA> Select Netherlands
On R172.447 - Control Unit View > Information and communication > IC Instrument Cluster > Adaptations > Configuration/Manual/Settings/Current Menu Settings > Acoustic Lock Feedback - ON
Note - This setting is also available directly in the Intrument Cluster using the steering wheel controls, no DAS/Xentry needed
Fan-on temp lower
Control Units> Drive> Engine> Control Unit Adaptations> Correction Programming> Suction Fan> Temp increase to max of 10 degrees C.
and
FUEL OCTANE SETTING STAR DAS Tips and Tricks - MBWorld.org Forums
Heres one that MAY have a positive performance impact, or may not.
Control Units > Drive > Motor Electronics > F3 ( to clear the nag warning ) > Control unit adaptations > Correction Programming > Ignition
You get 4 choice of minimum octane rating ( probably get more if you can get Variant Coding to change from USA to Rest Of World or Euro )
Baseline ( 87?)
89
91
93
I suspect setting a higher octane rating will allow a bit more initial ignition advance.
FUEL REMAINING STAR DAS Tips and Tricks - MBWorld.org Forums (Same as Gas Tank Mod in previous post)
In STAR go to MAIN GROUPS page
select "control Units"
then "Information and Communication"
then "ICM- Instrument cluster with maint interval display"
then "Control Unit Adaptations"
then "Variant Coding"
then "Codings specific for the instrument cluster"
look for " Trip computer fuel tank level display"
Select that. set to ACTIVE
F3
F5
F3
|