Форум по автодиагностике, автосканерам, ремонту, обслуживанию и эксплуатации автомобилей - Показать сообщение отдельно

Hitman_01983 · 20.06.2019, 11:48

Hi there,

I need help please guys. Need to change the Oil pump on 2009 Ford Bantam 1.3L 8V Rocam(Duratec) Engine. I did not remove the engine and loosened the sumo, removed starter, removed oil pump bolts. Removed the 2 bolts at the back of the plate between the engine and gearbox(Yes, I bent the plate and loosened them with a long tool), loosened the bolts that go through the gearbox. Now the sump seems loose but it is not coming out at all..

Anyone know why? Impossible task to get a Workshop Manual for this motor.

Thanks Guys,
Hitman

20.06.2019, 11:48	#1 (permalink)
Hitman_01983 Новичок Регистрация: 20.06.2019 Сообщений: 2 Вы сказали Спасибо: 0 Поблагодарили 0 раз(а) в 0 сообщениях Сказал(а) Фууу!: 0 Сказали Фууу! 0 раз(а) в 0 сообщениях Откуда: South Africa Авто: Audi A4 Quattro 3.0 Tdi 7-Spd Steptronic	2009 Ford Bantam 1.3L 8V Rocam Hi there, I need help please guys. Need to change the Oil pump on 2009 Ford Bantam 1.3L 8V Rocam(Duratec) Engine. I did not remove the engine and loosened the sumo, removed starter, removed oil pump bolts. Removed the 2 bolts at the back of the plate between the engine and gearbox(Yes, I bent the plate and loosened them with a long tool), loosened the bolts that go through the gearbox. Now the sump seems loose but it is not coming out at all.. Anyone know why? Impossible task to get a Workshop Manual for this motor. Thanks Guys, Hitman