misa54

Обучите датчик положения руля и все встанет на место!

DTC C1163 ST ANGLE SEN SAFE INFOID:0000000006032681
INSPECTION PROCEDURE
1.CHECK INDICATOR LAMP
Check that ESP OFF indicator lamp is on.
OK or NG
OK >> GO TO 2.
NG >> GO TO 3.
2.ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION
Adjust steering angle sensor neutral position. Refer to BRC-47, "Adjustment of Steering Angle Sensor Neutral
Position".
OK or NG
OK >> GO TO 3.
NG >> Check steering angle sensor. Refer to BRC-85, "DTC C1143 ST ANGLE SEN CIRCUIT".
3.CHECK INDICATOR LAMP
Check that ESP OFF indicator lamp is off.
OK or NG
OK >> GO TO 4.
NG >> Perform basic inspection. Refer to BRC-74, "Basic Inspection".
4.CHECK SELF-DIAGNOSTIC RESULTS
Perform ABS actuator and electric unit (control unit) self-diagnosis.
NOTE:
When self-diagnostic results show items other than those above, perform repair or replacement for the item
indicated and repeat self-diagnosis.
Is the above displayed on self-diagnosis display?
YES >> Erase error memory. Refer to BRC-67, "Self-Diagnosis".
NO >> INSPECTION END
DTC C1164 CV1 INFOID:0000000006032682
Refer to BRC-83, "DTC C1120 FR LH IN ABS SOL".
DTC C1165 CV2 INFOID:0000000006032683
Refer to BRC-83, "DTC C1120 FR LH IN ABS SOL".
DTC C1166 SV1 INFOID:0000000006032684
Refer to BRC-83, "DTC C1120 FR LH IN ABS SOL".
Self-diagnostic