До этого было так:
CAESAR STOS+ Rev.:2.10 from Mar 11 2004
generated protocol file from 07.08.2013 12:37
SystemCheck :
Check serial ... 0 Ok
CAESAR HW Detection :
D2Access ... 0 Ok
D2DownLoad ... 0 Ok
CAESAR Part D2 detected on COM2 with baudrate: 19200
CAESAR version check :
D2CheckSNVER ... 0 Ok
User is Daimler-Benz AG
User Authentification 1
Classification 0
Serial Number 022658
Authorization Level 3
Part D
Hardware Authentification 011200
Hardware Date 040301
Special EEPROM check :
D2 Special EEPROM check:
Inst. date registered ... 0 Ok
D2 Special CAN Test :
Special Test ... 3001 Error in CAN1 environment on Part D2 board
CAESAR version check :
D2CheckSNVER ... 0 Ok
User is Daimler-Benz AG
User Authentification 1
Classification 0
Serial Number 022658
Authorization Level 3
Part D
Hardware Authentification 011200
Hardware Date 040301
Slave check :
D2 Slave check
D2 Processor ... 0 Ok C165 (mask step CA) is mounted.
D2 RAM ... 0 Ok
D2 FLASH ... 0 Ok
D2 EEPROM ... 0 Ok
D2 SERCTL1 ... 0 Ok
D2 UART1/2 ... 0 Ok
D2 ADC ... 0 Ok
D2 Display Power Supply :
D2 Power Battery ... Voltage KL30 = 11.6 V
D2 Power Ignition ... Voltage KL15 = 11.3 V
D2 Voltage K-Lines :
D2 State K-Lines (35) ... Total 8 (+), 26 (-), 1 Error(s)
|