Спасибо, жаль только ссылки не могу смотреть, но думаю инфа полезная и не о том я ниже написал.
---
Вот что нашёл на просторах инета, что скажете?
Clone MB Star diagnostic tools + Vediamo
If you had the clone SD Connect (or C3 multiplexer) and need to do W222 model, here successfully experience is provided.
Some Star Tool experts had tested another way to diagnose W222, neither in XENTRY nor DAS, but with Vediamo.
Experts review:
a. Hi. SD C4 connects to w222 by Vediamo, of course, only the available modules.
b. I have tested W222 with C3 mux and Vediamo without any problem, coding, quick test….no need DoIP to Stuttgart
c. I have used an SD Connect 4 Chinese clone to do full diagnosis on a W222. You just can’t update the software in the Command with it.
NOTE:
For SD Connect C4, you need Vediamo V05.00.05 software
For MB multiplexer C3, you should go for Vediamo 4.2 + PIC12F509 chip
--------
Convert TCp/IP DLL to DoIP
Still someone tried to convert TCp/IP DLL to DoIP (Ethernet) using some SD Connect PCB add-on and firmware update via SD slot! Display picture below. But it comes to taking risk if it is not well connected. We are not responsible for the damage either.
И вот картиночки интересные