Ne0

или подключить к серверу, или зайти через веб интерфейс и заапдэйтить.

1).Use your cable and connect ICOM to port
2). Power ICOM by 12V power adapter or from 1x DLC
3). Use your browser (IE) and browse 169.254.92.38:60080/
User name: root
Password: NZY11502
4). Click "Update Firmware",and you can find the version of firmware.
5). Select ICOM-BootImage-XX-XX-XX.bin, set image type to "SYSTEM",
click "Send the file"
6). When it will say "Write the image file to the flash?", click "Yes",
then the ICOM led it will been RED
7). When it will say "The SYSTEM IMAGE update was successfull",
click "Update Firmware"
8). Select ICOM-ApplicationImage-XX-XX-XX.bin, set image type to "APPLICATION",
click "Send the file",the file is big so it will take some minutes to finish have patience.
9). When it will say "Write the image file to the flash?", click "Yes",
then the ICOM led it will been RED again
10). When it is ok, click "reboot".