Цитата:
|
Машина nissan juke 2012 г. 1.6 turbo awd . Установлен новый блок BCM, прописаны ключи. Машина заводится, едет. По ВСМ ошибка B26FC горит key постоянно при движении авто. Что не так. Как решить проблемку.
Спасибо. Буду очень признателен.
|
B26FC KEY REGISTRATION Intelligent Key that does not match the vehicle is registered.
Improper registration operation
Intelligent Key
BCM
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
Perform initialization of BCM and registration of all Intelligent Keys using CONSULT. Refer to the CONSULT Immobilizer mode and follow the on-screen instructions.
Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.
Is DTC detected? YES >> Go to SEC-89, "Diagnosis Procedure" NO >> Inspection End.
Diagnosis Procedure
1.REPLACE INTELLIGENT KEY
Prepare Intelligent Key that matches the vehicle.
Perform initialization of BCM and registration of all Intelligent Keys using CONSULT. Refer to the CONSULT Immobilizer mode and follow the on-screen instructions.
Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.
Is DTC detected? YES >> GO TO 2.
NO >> Inspection End.
2.REPLACE BCM
Replace BCM. Refer to BCS-75, "Removal and Installation".
Perform initialization of BCM and registration of all Intelligent Keys using CONSULT. Refer to the CONSULT Immobilizer mode and follow the on-screen instructions.
>> Inspection End.