U1900 - нет связи с блоком АБС
U0100
― Vehicle speed signal malfunction
• Motor is stopped: Maintained at condition when stopped. After the motor is restarted, vehicle speed is set at 200 km/h {124 mph}, and control continues.
• Motor is rotating: Controlled vehicle speed is increased to 20 km/h {12 mph} per s until it is set at 200 km/h {124 mph}, and control continues.
― Engine speed signal malfunction
• Motor is stopped: Maintained at condition when stopped. After the motor is restarted, engine speed is set at 1,000 rpm, and control continues.
• Motor is rotating: Controlled engine speed is set at 1,000 rpm, and control continues.
U0101:00
― Communication error to TCM
DTC U0073 CAN system communication error
DETECTION CONDITION • Error detected in line between CAN connection module and CAN bus communication line
FAIL-SAFE FUNCTION • Motor is stopped: Maintained at condition when stopped.
Motor is rotating: Controlled vehicle speed is increased to 20 km/h {12 mph} per s until it is set at 200 km/h {124 mph}, engine speed is set at 1,000 rpm, and control continues.
• Power steering malfunction indicator light: Illuminated
POSSIBLE CAUSE • Malfunction in CAN communication line
• Malfunction in each control module connecting to CAN communication line
• EHPAS CM malfunction.
• Poor connection at connectors
|