Форум по автодиагностике, автосканерам, ремонту, обслуживанию и эксплуатации автомобилей - Показать сообщение отдельно - BMW e70

Admin · 27.11.2014, 22:30

BMW e70 - как удалить прописанный ключ с Tool32

1. Open Tools32 and load CAS.prg File.
2. Search the job "status_aktuell_schluessel" and doubleclik it. Now you can see under KEY_NUMBER the number of your key which you use now.
3. Search the job "status_schluessel_frei_gesperrt" and doubleclick it. Now you can see which keys are saved in the CAS. If you have only two keys then go on with step 4, otherwise use another key and read this key number, too. Now you know which keys (and key numbers in CAS) you have.
4. Search the job "steuern_schluessel_gesperrt". Argument is the number ob the key, which you don't have. (Example: You have two keys, the first key has the number 1 and the second (stolen) key has the number 2, then you must write the number 2 into the argument box). After that, doubleclick the job. The result must be OKAY.
5. Search the job "status_schluessel_frei_gesperrt" and doubleclick it. Verify if the key was locked.

27.11.2014, 22:30	#1 (permalink)
Admin Админ Регистрация: 07.09.2008 Сообщений: 3,595 Вы сказали Спасибо: 267 Поблагодарили 13,645 раз(а) в 1,270 сообщениях Сказал(а) Фууу!: 28 Сказали Фууу! 0 раз(а) в 0 сообщениях Откуда: Москва Авто: Ford Fiesta	BMW e70 - как удалить прописанный ключ с Tool32 BMW e70 - как удалить прописанный ключ с Tool32 1. Open Tools32 and load CAS.prg File. 2. Search the job "status_aktuell_schluessel" and doubleclik it. Now you can see under KEY_NUMBER the number of your key which you use now. 3. Search the job "status_schluessel_frei_gesperrt" and doubleclick it. Now you can see which keys are saved in the CAS. If you have only two keys then go on with step 4, otherwise use another key and read this key number, too. Now you know which keys (and key numbers in CAS) you have. 4. Search the job "steuern_schluessel_gesperrt". Argument is the number ob the key, which you don't have. (Example: You have two keys, the first key has the number 1 and the second (stolen) key has the number 2, then you must write the number 2 into the argument box). After that, doubleclick the job. The result must be OKAY. 5. Search the job "status_schluessel_frei_gesperrt" and doubleclick it. Verify if the key was locked.