Показать сообщение отдельно
Старый 13.06.2024, 13:35   #1323 (permalink)
Новичок
 
Регистрация: 29.05.2024
Сообщений: 13
Вы сказали Спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщениях
Сказал(а) Фууу!: 0
Сказали Фууу! 0 раз(а) в 0 сообщениях
Откуда: France
Авто: BMW 740d (E65) + tweaked many other BMWs
По умолчанию

Цитата:
Сообщение от TumKos Посмотреть сообщение
This will not solve the problem of bad blocks.
Questions are :
  1. Does solving bad blocks is mandatory ?
  2. What will be solved doing the USB restore ? (PCI enumeration, bad blocks, etc ...)
  3. Is it mandatory to change the SERIAL NUMBER from "1120134" to "1801201" (or anything of a higher value like "1801202", "1801203", etc ...)
  4. If modifying the 24C02 EEPROM is mandatory, where is this IC located on my PCB version "SP269-B1" / "SP269-B1S" ? (Ferrum seems to point me to a SMD titled H216 ... seems strange to me as the same chip on PCB version "SP101-B", "SP168-B", "SP168BA" or "SP269" is titled "2402 ... WP"
  5. In order to do the USB RESTORE, it seems that onboard button is not enough and there is a need to do a modification ? (what is it / where are the soldering points / etc ... ?)

Thanks

Последний раз редактировалось simkard; 13.06.2024 в 13:45..
simkard вне форума   Ответить с цитированием