Сообщение от arrival
Для просмотра ссылок или изображений в данном разделе, у Вас должно быть не менее 15 сообщение(ий). Сейчас у Вас 0 сообщение(ий).

Нашел на одном зарубежном сайте про активацию TPMS:
1. 03 ABS Brakes
2. STG Adaptation -> function 10
3. Choose Tire pressure monitoring display
4. verified Store value is 2
5. the same value stored is on Tire pressure monitoring display;tire selection
Long Coding in last 3 Bytes to me were:
004 002 and we amended 70C002, so I put 0 instead of 7 (this bit will now continuously flashing icon on the board to amend it) and instead I put 4 C (modifying the bit that I was able to give SET bolero, so I did not change when I press the SET function appear Currently not available).
To see the bolero:
1. 5F Information
2. STG Adaptation -> function 10
3. Choose (13) - Vehicle function list BAP-tire_pressure_system_0x07
4. Set value to active
check whether (14)-Vehicle function list BAB-tire_pressure_system_0x07_msg_bus has the value: Suspension data bus

1. 5F Information
2. STG Adaptation -> function 10
3. Choose (56)-Vehicle menu operation-menu_display_rdk
4. Set value to active
check that is activated: (58)- Vehicle menu operation-menu_display_rdk_over_threshold_high

1. 17 Instruments
2. STG Long Coding -> function 7
3. Byte 04
4. Enable bit 0 -> Indirect Tire Pressure Monitoring System(TPMS) instaled.