Цитата:
|
Вот тут и проблема у меня. в том што я нашел два логина и кодировки которые он принимает. подбором и методом проб и ошибок выписал. через ваг кан про прописываю логин кодировку наряд он принимает пишет ок. делаю адаптацию рулевого датчика пишет ок. и как бы вроде все нормально. но ошибка блок абс закодирован неверно не уходит(
Для просмотра ссылок или изображений в данном разделе, у Вас должно быть не менее 15 сообщение(ий). Сейчас у Вас 0 сообщение(ий).
я и подумал а вдруг можно перешить блок абс и начал искать какое по туда устанавливается
|
Если подвернется Д3 запишу что в кодировках и логинах
на скрине старая инструкция с ross-tech (не то было в картинке )
Login
Note #1: After Login has been carried out you need to recode the control module.
Note #2: The
PR codes ( such as 1LJ ) can be found in a sticker near the spare tire well and the matching sticker on the 1st page of the owners manual. Click here to see an Example of a Sticker.
Note #3: Use function Coding-II instead of Login if that button is unavailable.
Note #4: For North American Region (NAR) check the fourth Digit of the VIN for the Chassis Type. M stands for Audi A8 (Long Wheel Base), L for Audi A8 (Short Wheel Base) and P for Audi S8 (Short Wheel Base).
In the RoW (Rest of World) market
PR-codes need to be used. K8L Notchback - long wheelbase (Long Wheel Base) and K8B Notchback (Short Wheel Base)
0?xxx: Chassis
3 = Audi S8 (Short Wheel Base)
5 = Audi A8 (Short Wheel Base)
6 = Audi A8 (Long Wheel Base)
0x?xx: Brakes
1 = 2FNR 42 AL 18" (
PR-1LJ/1LK)
2 = 2FNR 42 AL 17" (
PR-1LL/1LM)
4 = FNRG-60 16" (
PR-1LG)
7 = Brembo M6 AL 19" (
PR-1LW)
0xx?x: Engine
2 = 10 Cyl. Gasoline
3 = 12 Cyl. Gasoline OR 6/8 Cyl. Gasoline/Diesel with Brembo M6 AL 19" (
PR-1LW)
5 = 6/8 Cyl. Diesel w/o Brembo M6 AL 19" (
PR-1LW)
6 = 6 Cyl. Diesel (Long Wheel Base)
9 = 6/8 Cyl. Gasoline w/o Brembo M6 AL 19" (
PR-1LW)
0xxx?: Transmission
7 = Automatic (09E/09L)
9 = Multitronic (01J)
Coding
Note #1: Coding is accepted after a specific login has been carried out.
Note #2: After successful coding the steering angle sensor basic setting needs to be carried out.
Note #3: The
PR codes ( such as 1LJ ) can be found in a sticker near the spare tire well and the matching sticker on the 1st page of the owners manual. Click here to see an Example of a Sticker.
Note #4: For North American Region (NAR) check the fourth Digit of the VIN for the Chassis Type. M stands for Audi A8 (Long Wheel Base), L for Audi A8 (Short Wheel Base) and P for Audi S8 (Short Wheel Base).
Note #5: In some cases, you will need to enter a non-zero WorkShop Code, such as 12345.
000?xxx: Chassis
1 = Audi S8 (Short Wheel Base)
7 = Audi A8 (Long Wheel Base)
8 = Audi A8 (Short Wheel Base)
000x?xx: Brakes
3 = FNRG-60 16" (
PR-1LG)
5 = 2FNR 42 AL 17" (
PR-1LL/1LM)
6 = 2FNR 42 AL 18" (
PR-1LJ/1LK)
7 = Brembo M6 AL 19" (
PR-1LW)
000xx?x: Engine
2 = 10 Cyl. Gasoline
3 = 12 Cyl. Gasoline OR 6/8 Cyl. Gasoline/Diesel with Brembo M6 AL 19" (
PR-1LW)
5 = 6/8 Cyl. Diesel w/o Brembo M6 AL 19" (
PR-1LW)
6 = 6 Cyl. Diesel (Long Wheel Base)
9 = 6/8 Cyl. Gasoline w/o Brembo M6 AL 19" (
PR-1LW)
000xxx?: Transmission
7 = Automatic (09E/09L)
9 = Multitronic (01J)
Basic Setting
Steering Angle Sensor (G85) Calibration
[Select]
[03 - ABS Brakes]
[Fault Codes - 02]
[Done, Go Back]
Turn steering wheel at least 30 ° left and back straight ahead.
[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]
[Login - 11]
Or [Coding - 11] if Login is not shown
Enter 40168
[Do It!]
[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]
[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]
[Close Controller, Go Back - 06]