|
Ремонт и диагностика спецтехники | ремонт электроники Все вопросы по ремонту и диагностике бульдозеров, погрузчиков, эвакуаторов, лесотехники, дорожной и коммунальной техники, самосвалов, складской техники и оборудования, строительной техники, топливоперевозчиков, экскаваторов обсуждаем в данном разделе. |
|
LinkBack | Опции темы | Поиск в этой теме | Опции просмотра |
![]() |
#25 (permalink) |
Новичок
Регистрация: 03.01.2014
Сообщений: 86
Вы сказали Спасибо: 18
Поблагодарили 21 раз(а) в 20 сообщениях
Сказал(а) Фууу!: 0
Сказали Фууу! 0 раз(а) в 0 сообщениях
Откуда: Эстония
Авто: BMW320D
|
![]()
06 VMN LOW
Condition for error detection Failure in the VMN test. This test starts when the ignition key is turned ON and there is no consuption of ampere. The alarm appears if there is a leakage of current on one or more phases; check the connections of the 3 power cables from the logic unit to the traction motor and the cables condition. In order to point out if the fault is produced by an internal or external cause proceed as follow: connect the traction logic unit to the lifting motor and check if the alarm “06” appears on the display. YES: repace the logic unit NO: check the traction motor insulation. Two of the phases of the motor are kept under control by shunts. If the logic unit detects a leakage of current keeps the truck stopped. |
![]() |
![]() |
Метки |
bt forklifts |
|
|