Форум по автодиагностике, автосканерам, ремонту, обслуживанию и эксплуатации автомобилей

Форум по автодиагностике, автосканерам, ремонту, обслуживанию и эксплуатации автомобилей (http://autoprogs.ru/index.php)
-   Mercedes DAS, Xentry, WIS, EPC | Star Diagnosis, SD Connect, Carsoft (http://autoprogs.ru/forumdisplay.php?f=171)
-   -   Полезное для DAS - SPECIAL FUNCTIONS (PKW,SMART,VAN,IMO,BUS,LKW) (http://autoprogs.ru/showthread.php?t=36047)

Admin 18.11.2019 15:03

Полезное для DAS - SPECIAL FUNCTIONS (PKW,SMART,VAN,IMO,BUS,LKW)
 
Вложений: 18
PKW
I. DAS Special Function Password Free PKW and SMART

Назначение: when you do special functions, e.g AB or ABR ecu in DAS W204, you are asked to insert password. With this patch, you can enter any character, minimum one and F2 to continue

Special Function Password Free.rar

II. Audio Video Navigation and telematics - HU Exchange Audio 50 to COMAND password free
Назначение: No password required, F3 to continue.

Audio Video Navigation and telematics - HU Exchange Audio 50 to COMAND pw free.rar

III. Audio Video Navigation and telematics - add Dev menu in DAS COMAND APS menu
Назначение: Add developer menu in DAS Comand APS menu

Audio Video Navigation and telematics - add Dev menu in COMAND APS.rar

IV.TRANSMISSION or GETRIEBE - EGS1 Special Function password free
Назначение: No password required, F3 to continue.

TRANSMISSION or GETRIEBE - EGS1 Special Function password free.rar

V. TRANSMISSION or GETRIEBE - EGS2 Diagnosis Routine password free
Назначение: No password required, F3 to continue.

TRANSMISSION or GETRIEBE - EGS2 Diagnosis Routine password free.rar

VI. DAS Deutsch - TRANSMISSION or GETRIEBE VGS3 SonderAbläufe Sonderfunktionen password free
Назначение: No password required, F3 to continue. This unique menu only if you use DAS in Deutsch (German language). Cmiiw, this is like eeprom dump special function.

Special Function Password Free.rar

VII. Adding 204 in DAS STANDALONE
Назначение: Add 204 in DAS Standalone. You can do variant coding in development menu with language (in Deutsch) that are more friendly than vediamo, or adaptation or actuation that are password protected in 204 xentry. I 'facelift' the menu and delete a disturb file compare to the one which floating around. The disturbed file causes 'data missing' error in diagnostic DAS vehicles that are missing definition because of the use of older def file.

Adding 204 in DAS STANDALONE.txt

VIII. W164 DAS Password for Tailgate special function
Назначение: No Password Required, press F2 to continue jaxone quote: "We replaced a Rear Sam Module (bought NEW module from Mercedes) for a ML 320cdi (164) as the old one went in fumes of smoke because of water damage. Module installed and coded and everything is fine except the height of the tailgate (hydraulic). When I want to make adaptation of tailgate (in REAR SAM), DAS will come and ask for a password for this function."

W164 DAS Password for Tailgate special function Password Free.rar

IX. 212 PROTOTYPE FOR XDOS DAS Standalone ver 0.8
Назначение: - Diagnose 212 using XDOS DAS Standalone.- No cbf conversion error like the one that floating in internet/forum - Several error fixes for 212 (not fully yet. will be added later)- Includes old prototype cbf (without seedkey?)- ability to add/expand Development Data ourselves
Link: include in PassFreeDasAIO_pesona.txt


SMART
X. ADD SMART SAM 450 & 452 Extra Functions for power users

Назначение: Add extra functions: Writing VIN & Development Status (inside control unit adaptation).

SMART SAM 450 & 452 Extra Functions Writing VIN & Development Status (inside control unit adaptation).rar

XI. ADD SMART 451 Special Functions for power users
Назначение:- Add Development Data & Development Data (inside control unit adaptation) SAM451 - Add Development Data & Extra Coding(inside control unit adaptation) ESP451

Add DevData&DeData in cu adaptation SAM451+DevData&ExtraCoding in cu adaptation ESP451.rar

XII. ADD SMART 454 Special Functions for power users
Назначение: Add Development Data and Read codingstring in ESP 454

Add dev data and read codingstring in ESP 454.rar

XIII. Suppress ALL TAN codes for Smart equipment upto 2016-09 without Qutomotive Advertisement
Назначение: Suppress ALL TAN codes for Smart equipment upto 2016-09 and without Qutomotive Advertisement

Suppress ALL TAN codes for Smart equipment upto 2016-09.rar

XIV. ADD SMART 451 & 454 OFFLINE KEY TEACH-IN program key transponder key DAS 2016-12 UP
Назначение: Since Xentry 12/16 there is a new system to teach in Smart keys (BR 451 and BR 454). You don't have the TAN input to teach in again. Smart TAN Calculator and the old csdsmart solution don't work anymore[Image: dead.gif] Now you have to log in to daimler server. While Smart 450, 452 don't go online and also do not need TAN codes. This fix is able to teach in program key transponder key Offline & don't need TAN codes too for Smart SAM451 & ETACS454

Password Free & OFFLINE key teach-in program key transponder key Smart SAM451 &ETACS454 2016-12 UP.rar

XV. ADD SMART 451 & 454 OFFLINE SAM Assignment DAS 2016-12 UP
Назначение: SMART 451 454 OFFLINE SAM Assignment 2016-12UP

SMART 451 454 OFFLINE SAM Assignment 2016-12UP.rar


TRANSPORTER
XVI. Special Function Password Free Transporter

Назначение: Special Function Password Free for Transporter

Special Function Password Free for Transporter.rar


LKW
XVII. Nox Torque Limit Setting (FR/CPC0) with correct New FDOK XT

Назначение: - Nox Torque limit Setting: No need FDOK encrypted random number, F3 to continue - Calculate correct nueu-FDOK internally, and change the encrypted random number to correct one in memory - Added value: UNLOCK Legal speed limit direct edit without going to special function

Nox Torque Limit Setting (in FR_CPC0) with correct New FDOK XT .rar

XVIII. Erase SCR/ADBLUE fault code (in MR) with correct New FDOK XN
Назначение:- Erasing of emission-relevant (SCR/ADBLUE) fault code: No need FDOK encrypted random number, F3 to continue - Calculate correct nueu-FDOK XN internally, and change the encrypted random number to correct one in memory

Erase SCR ADBLUE fault code (in MR) with correct New FDOK XN.rar

XIX. NFZ SonderFunktion Password Free
Назначение: password free for NFZ when doing SonderFunktion (Flash/Programming)

NFZ SonderFunktion Password Free.rar

XX. Added Offline EOL & VMAX ALL LKW (OBD1 & OBD2) for DAS 2014-12UP
Назначение: Patch original files from XDOS 2018-07: - Added Offline EOL & VMAX ALL LKW (OBD1 & OBD2) for DAS 2014-12UP - Added Deleted VIN function - Avoid MR Manipulation because of change VIN

Added Offline EOL & VMAX ALL LKW (OBD1 & OBD2) for DAS 2014-12UP.rar


IMO
XXI. ADM2 & ADM3 Unlock speed

Назначение: Speed limit Read/Write on ADM2 and ADM3 on Kamaz, MAZ, Industrial motors, Crans, Combines
a. Chipcard method

KAMAZ ADM2 ADM3.rar

XXII. CPC4 Unlock speed
Назначение: New IMO replace its old ADM2/3 with new CPC4 - TC1796. This will unlock speed limit Read/Write on Kamaz, MAZ, Freightliner,...
a. Chipcard method

Unlock VMAX (CPC4 CPCECAN) by Chipkarte.rar

Admin 18.11.2019 15:05

MR1_96 Conversion to emissions standard 'Euro 3' download + Flash Data Complete

Скачать: [Ссылки могут видеть только зарегистрированные пользователи. Зарегистрироваться...].

ansaf 12.05.2020 18:50

Вложений: 2
Добрый вечер ,уважаемые форумчане.
Работаю с программой XENTRY_4IMO с версией данных 03_2020 . В данной версии программы из меню кодирования блока ADM3 исчезла строка «провести параметрирование вручную».
В версии XENTRY_4IMO с версией данных 12_2018 такая строка имеется и очень востребована.
В архиве скрины с обеих программ. Нужная строка выделена красной рамкой.
Пожалуйста, подскажете, как можно добавить недостающую строку в программу с версией данных 03_2020?

ansaf 16.05.2020 11:37

Попробую ответить на свой вопрос. Предполагаю, что мне необходимы следующие файлы:

XXVII. Unlock all ADM3 control unit adaptations menu
purpose: This will unlock all ADM3 control unit adaptations menu in Kamaz, MAZ, Industrial motors, Crans, Freightliner. Without this patch, you only have one menu Re-Learn accelerator pedal and don't have 'Individual Parameters' to set all parameters and don't have a special function for change VIN.
XXVIII. Unlock all ADM2 control unit adaptations menu
purpose: This will unlock all ADM2 control unit adaptations menu in Kamaz, MAZ, Industrial motors, Crans, Freightliner. Without this patch, you only have one menu Re-Learn accelerator pedal and don't have 'Individual Parameters' to set all parameters and don't have a special function for change VIN.
XXIX. Unlock all MR Industrial Motor control unit adaptations menu
purpose: This will unlock all MR control unit adaptations menu in Kamaz, MAZ, Industrial motors, Crans, Freightliner.

Пока в свободном доступе их не нашел.

Кстати, файл из первого поста: « ADM2 & ADM3 Unlock speed
purpose: Speed limit Read/Write on ADM2 and ADM3 on Kamaz, MAZ, Industrial motors, Crans, Combines» действительно позволяет менять максимальную скорость автомобиля.

nalinn0 27.08.2020 22:32

,htl

----------

бред

----------

бред

cahekmostki 10.09.2021 11:02

Цитата:

Сообщение от Admin (Сообщение 875912)
PKW
I. DAS Special Function Password Free PKW and SMART

Назначение: when you do special functions, e.g AB or ABR ecu in DAS W204, you are asked to insert password. With this patch, you can enter any character, minimum one and F2 to continue

Special Function Password Free.rar

II. Audio Video Navigation and telematics - HU Exchange Audio 50 to COMAND password free
Назначение: No password required, F3 to continue.

Audio Video Navigation and telematics - HU Exchange Audio 50 to COMAND pw free.rar

III. Audio Video Navigation and telematics - add Dev menu in DAS COMAND APS menu
Назначение: Add developer menu in DAS Comand APS menu

Audio Video Navigation and telematics - add Dev menu in COMAND APS.rar

IV.TRANSMISSION or GETRIEBE - EGS1 Special Function password free
Назначение: No password required, F3 to continue.

TRANSMISSION or GETRIEBE - EGS1 Special Function password free.rar

V. TRANSMISSION or GETRIEBE - EGS2 Diagnosis Routine password free
Назначение: No password required, F3 to continue.

TRANSMISSION or GETRIEBE - EGS2 Diagnosis Routine password free.rar

VI. DAS Deutsch - TRANSMISSION or GETRIEBE VGS3 SonderAbläufe Sonderfunktionen password free
Назначение: No password required, F3 to continue. This unique menu only if you use DAS in Deutsch (German language). Cmiiw, this is like eeprom dump special function.

Special Function Password Free.rar

VII. Adding 204 in DAS STANDALONE
Назначение: Add 204 in DAS Standalone. You can do variant coding in development menu with language (in Deutsch) that are more friendly than vediamo, or adaptation or actuation that are password protected in 204 xentry. I 'facelift' the menu and delete a disturb file compare to the one which floating around. The disturbed file causes 'data missing' error in diagnostic DAS vehicles that are missing definition because of the use of older def file.

Adding 204 in DAS STANDALONE.txt

VIII. W164 DAS Password for Tailgate special function
Назначение: No Password Required, press F2 to continue jaxone quote: "We replaced a Rear Sam Module (bought NEW module from Mercedes) for a ML 320cdi (164) as the old one went in fumes of smoke because of water damage. Module installed and coded and everything is fine except the height of the tailgate (hydraulic). When I want to make adaptation of tailgate (in REAR SAM), DAS will come and ask for a password for this function."

W164 DAS Password for Tailgate special function Password Free.rar

IX. 212 PROTOTYPE FOR XDOS DAS Standalone ver 0.8
Назначение: - Diagnose 212 using XDOS DAS Standalone.- No cbf conversion error like the one that floating in internet/forum - Several error fixes for 212 (not fully yet. will be added later)- Includes old prototype cbf (without seedkey?)- ability to add/expand Development Data ourselves
Link: include in PassFreeDasAIO_pesona.txt


SMART
X. ADD SMART SAM 450 & 452 Extra Functions for power users

Назначение: Add extra functions: Writing VIN & Development Status (inside control unit adaptation).

SMART SAM 450 & 452 Extra Functions Writing VIN & Development Status (inside control unit adaptation).rar

XI. ADD SMART 451 Special Functions for power users
Назначение:- Add Development Data & Development Data (inside control unit adaptation) SAM451 - Add Development Data & Extra Coding(inside control unit adaptation) ESP451

Add DevData&DeData in cu adaptation SAM451+DevData&ExtraCoding in cu adaptation ESP451.rar

XII. ADD SMART 454 Special Functions for power users
Назначение: Add Development Data and Read codingstring in ESP 454

Add dev data and read codingstring in ESP 454.rar

XIII. Suppress ALL TAN codes for Smart equipment upto 2016-09 without Qutomotive Advertisement
Назначение: Suppress ALL TAN codes for Smart equipment upto 2016-09 and without Qutomotive Advertisement

Suppress ALL TAN codes for Smart equipment upto 2016-09.rar

XIV. ADD SMART 451 & 454 OFFLINE KEY TEACH-IN program key transponder key DAS 2016-12 UP
Назначение: Since Xentry 12/16 there is a new system to teach in Smart keys (BR 451 and BR 454). You don't have the TAN input to teach in again. Smart TAN Calculator and the old csdsmart solution don't work anymore[Image: dead.gif] Now you have to log in to daimler server. While Smart 450, 452 don't go online and also do not need TAN codes. This fix is able to teach in program key transponder key Offline & don't need TAN codes too for Smart SAM451 & ETACS454

Password Free & OFFLINE key teach-in program key transponder key Smart SAM451 &ETACS454 2016-12 UP.rar

XV. ADD SMART 451 & 454 OFFLINE SAM Assignment DAS 2016-12 UP
Назначение: SMART 451 454 OFFLINE SAM Assignment 2016-12UP

SMART 451 454 OFFLINE SAM Assignment 2016-12UP.rar


TRANSPORTER
XVI. Special Function Password Free Transporter

Назначение: Special Function Password Free for Transporter

Special Function Password Free for Transporter.rar


LKW
XVII. Nox Torque Limit Setting (FR/CPC0) with correct New FDOK XT

Назначение: - Nox Torque limit Setting: No need FDOK encrypted random number, F3 to continue - Calculate correct nueu-FDOK internally, and change the encrypted random number to correct one in memory - Added value: UNLOCK Legal speed limit direct edit without going to special function

Nox Torque Limit Setting (in FR_CPC0) with correct New FDOK XT .rar

XVIII. Erase SCR/ADBLUE fault code (in MR) with correct New FDOK XN
Назначение:- Erasing of emission-relevant (SCR/ADBLUE) fault code: No need FDOK encrypted random number, F3 to continue - Calculate correct nueu-FDOK XN internally, and change the encrypted random number to correct one in memory

Erase SCR ADBLUE fault code (in MR) with correct New FDOK XN.rar

XIX. NFZ SonderFunktion Password Free
Назначение: password free for NFZ when doing SonderFunktion (Flash/Programming)

NFZ SonderFunktion Password Free.rar

XX. Added Offline EOL & VMAX ALL LKW (OBD1 & OBD2) for DAS 2014-12UP
Назначение: Patch original files from XDOS 2018-07: - Added Offline EOL & VMAX ALL LKW (OBD1 & OBD2) for DAS 2014-12UP - Added Deleted VIN function - Avoid MR Manipulation because of change VIN

Added Offline EOL & VMAX ALL LKW (OBD1 & OBD2) for DAS 2014-12UP.rar


IMO
XXI. ADM2 & ADM3 Unlock speed

Назначение: Speed limit Read/Write on ADM2 and ADM3 on Kamaz, MAZ, Industrial motors, Crans, Combines
a. Chipcard method

KAMAZ ADM2 ADM3.rar

XXII. CPC4 Unlock speed
Назначение: New IMO replace its old ADM2/3 with new CPC4 - TC1796. This will unlock speed limit Read/Write on Kamaz, MAZ, Freightliner,...
a. Chipcard method

Unlock VMAX (CPC4 CPCECAN) by Chipkarte.rar

Можно в личку . Прав нету еще((

vw00156 20.10.2021 09:19

Спасибо, но пока не вижу, но пытаюсь дозвониться до 15 сообщений.

di-bond 15.11.2021 02:57

[/COLOR]Спасибо , а можно в личку ,а то пока не вижу ссылку :help:

İsmail 11.02.2022 01:57

Цитата:

Сообщение от Admin (Сообщение 875913)
MR1_96 Conversion to emissions standard 'Euro 3' download + Flash Data Complete

Скачать: .

Bu türlü indiremiyorum

----------

Цитата:

Сообщение от ansaf (Сообщение 940781)
Добрый вечер ,уважаемые форумчане.
Работаю с программой XENTRY_4IMO с версией данных 03_2020 . В данной версии программы из меню кодирования блока ADM3 исчезла строка «провести параметрирование вручную».
В версии XENTRY_4IMO с версией данных 12_2018 такая строка имеется и очень востребована.
В архиве скрины с обеих программ. Нужная строка выделена красной рамкой.
Пожалуйста, подскажете, как можно добавить недостающую строку в программу с версией данных 03_2020?

Olmuyor ki

----------

Olmuyor

----------

Цитата:

Сообщение от ansaf (Сообщение 940781)
Добрый вечер ,уважаемые форумчане.
Работаю с программой XENTRY_4IMO с версией данных 03_2020 . В данной версии программы из меню кодирования блока ADM3 исчезла строка «провести параметрирование вручную».
В версии XENTRY_4IMO с версией данных 12_2018 такая строка имеется и очень востребована.
В архиве скрины с обеих программ. Нужная строка выделена красной рамкой.
Пожалуйста, подскажете, как можно добавить недостающую строку в программу с версией данных 03_2020?

Kjjojoj

----------

Цитата:

Сообщение от ansaf (Сообщение 940781)
Добрый вечер ,уважаемые форумчане.
Работаю с программой XENTRY_4IMO с версией данных 03_2020 . В данной версии программы из меню кодирования блока ADM3 исчезла строка «провести параметрирование вручную».
В версии XENTRY_4IMO с версией данных 12_2018 такая строка имеется и очень востребована.
В архиве скрины с обеих программ. Нужная строка выделена красной рамкой.
Пожалуйста, подскажете, как можно добавить недостающую строку в программу с версией данных 03_2020?

Kjjojoj

----------

Цитата:

Сообщение от Admin (Сообщение 875912)
PKW
I. DAS Special Function Password Free PKW and SMART

Назначение: when you do special functions, e.g AB or ABR ecu in DAS W204, you are asked to insert password. With this patch, you can enter any character, minimum one and F2 to continue

Special Function Password Free.rar

II. Audio Video Navigation and telematics - HU Exchange Audio 50 to COMAND password free
Назначение: No password required, F3 to continue.

Audio Video Navigation and telematics - HU Exchange Audio 50 to COMAND pw free.rar

III. Audio Video Navigation and telematics - add Dev menu in DAS COMAND APS menu
Назначение: Add developer menu in DAS Comand APS menu

Audio Video Navigation and telematics - add Dev menu in COMAND APS.rar

IV.TRANSMISSION or GETRIEBE - EGS1 Special Function password free
Назначение: No password required, F3 to continue.

TRANSMISSION or GETRIEBE - EGS1 Special Function password free.rar

V. TRANSMISSION or GETRIEBE - EGS2 Diagnosis Routine password free
Назначение: No password required, F3 to continue.

TRANSMISSION or GETRIEBE - EGS2 Diagnosis Routine password free.rar

VI. DAS Deutsch - TRANSMISSION or GETRIEBE VGS3 SonderAbläufe Sonderfunktionen password free
Назначение: No password required, F3 to continue. This unique menu only if you use DAS in Deutsch (German language). Cmiiw, this is like eeprom dump special function.

Special Function Password Free.rar

VII. Adding 204 in DAS STANDALONE
Назначение: Add 204 in DAS Standalone. You can do variant coding in development menu with language (in Deutsch) that are more friendly than vediamo, or adaptation or actuation that are password protected in 204 xentry. I 'facelift' the menu and delete a disturb file compare to the one which floating around. The disturbed file causes 'data missing' error in diagnostic DAS vehicles that are missing definition because of the use of older def file.

Adding 204 in DAS STANDALONE.txt

VIII. W164 DAS Password for Tailgate special function
Назначение: No Password Required, press F2 to continue jaxone quote: "We replaced a Rear Sam Module (bought NEW module from Mercedes) for a ML 320cdi (164) as the old one went in fumes of smoke because of water damage. Module installed and coded and everything is fine except the height of the tailgate (hydraulic). When I want to make adaptation of tailgate (in REAR SAM), DAS will come and ask for a password for this function."

W164 DAS Password for Tailgate special function Password Free.rar

IX. 212 PROTOTYPE FOR XDOS DAS Standalone ver 0.8
Назначение: - Diagnose 212 using XDOS DAS Standalone.- No cbf conversion error like the one that floating in internet/forum - Several error fixes for 212 (not fully yet. will be added later)- Includes old prototype cbf (without seedkey?)- ability to add/expand Development Data ourselves
Link: include in PassFreeDasAIO_pesona.txt


SMART
X. ADD SMART SAM 450 & 452 Extra Functions for power users

Назначение: Add extra functions: Writing VIN & Development Status (inside control unit adaptation).

SMART SAM 450 & 452 Extra Functions Writing VIN & Development Status (inside control unit adaptation).rar

XI. ADD SMART 451 Special Functions for power users
Назначение:- Add Development Data & Development Data (inside control unit adaptation) SAM451 - Add Development Data & Extra Coding(inside control unit adaptation) ESP451

Add DevData&DeData in cu adaptation SAM451+DevData&ExtraCoding in cu adaptation ESP451.rar

XII. ADD SMART 454 Special Functions for power users
Назначение: Add Development Data and Read codingstring in ESP 454

Add dev data and read codingstring in ESP 454.rar

XIII. Suppress ALL TAN codes for Smart equipment upto 2016-09 without Qutomotive Advertisement
Назначение: Suppress ALL TAN codes for Smart equipment upto 2016-09 and without Qutomotive Advertisement

Suppress ALL TAN codes for Smart equipment upto 2016-09.rar

XIV. ADD SMART 451 & 454 OFFLINE KEY TEACH-IN program key transponder key DAS 2016-12 UP
Назначение: Since Xentry 12/16 there is a new system to teach in Smart keys (BR 451 and BR 454). You don't have the TAN input to teach in again. Smart TAN Calculator and the old csdsmart solution don't work anymore[Image: dead.gif] Now you have to log in to daimler server. While Smart 450, 452 don't go online and also do not need TAN codes. This fix is able to teach in program key transponder key Offline & don't need TAN codes too for Smart SAM451 & ETACS454

Password Free & OFFLINE key teach-in program key transponder key Smart SAM451 &ETACS454 2016-12 UP.rar

XV. ADD SMART 451 & 454 OFFLINE SAM Assignment DAS 2016-12 UP
Назначение: SMART 451 454 OFFLINE SAM Assignment 2016-12UP

SMART 451 454 OFFLINE SAM Assignment 2016-12UP.rar


TRANSPORTER
XVI. Special Function Password Free Transporter

Назначение: Special Function Password Free for Transporter

Special Function Password Free for Transporter.rar


LKW
XVII. Nox Torque Limit Setting (FR/CPC0) with correct New FDOK XT

Назначение: - Nox Torque limit Setting: No need FDOK encrypted random number, F3 to continue - Calculate correct nueu-FDOK internally, and change the encrypted random number to correct one in memory - Added value: UNLOCK Legal speed limit direct edit without going to special function

Nox Torque Limit Setting (in FR_CPC0) with correct New FDOK XT .rar

XVIII. Erase SCR/ADBLUE fault code (in MR) with correct New FDOK XN
Назначение:- Erasing of emission-relevant (SCR/ADBLUE) fault code: No need FDOK encrypted random number, F3 to continue - Calculate correct nueu-FDOK XN internally, and change the encrypted random number to correct one in memory

Erase SCR ADBLUE fault code (in MR) with correct New FDOK XN.rar

XIX. NFZ SonderFunktion Password Free
Назначение: password free for NFZ when doing SonderFunktion (Flash/Programming)

NFZ SonderFunktion Password Free.rar

XX. Added Offline EOL & VMAX ALL LKW (OBD1 & OBD2) for DAS 2014-12UP
Назначение: Patch original files from XDOS 2018-07: - Added Offline EOL & VMAX ALL LKW (OBD1 & OBD2) for DAS 2014-12UP - Added Deleted VIN function - Avoid MR Manipulation because of change VIN

Added Offline EOL & VMAX ALL LKW (OBD1 & OBD2) for DAS 2014-12UP.rar


IMO
XXI. ADM2 & ADM3 Unlock speed

Назначение: Speed limit Read/Write on ADM2 and ADM3 on Kamaz, MAZ, Industrial motors, Crans, Combines
a. Chipcard method

KAMAZ ADM2 ADM3.rar

XXII. CPC4 Unlock speed
Назначение: New IMO replace its old ADM2/3 with new CPC4 - TC1796. This will unlock speed limit Read/Write on Kamaz, MAZ, Freightliner,...
a. Chipcard method

Unlock VMAX (CPC4 CPCECAN) by Chipkarte.rar


Ürün

----------

YyuYyy

----------

Yayaya1

praporgicu 20.02.2022 12:20

hello my friends i need please download link for das special functions i am new here. thank you very much.

----------

please


Текущее время: 02:25. Часовой пояс GMT +3.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc. Перевод:
zCarot
Автодиагностика и автосканеры.