Замена приборной панели VW Passat B5, 2003, 2.8

dimstr1 · 28.09.2015, 19:22

[Select]
[17 - Instruments]

[Login - 11]
For the following procedure, use the PIN of the REPLACEMENT (NEW or USED) instrument cluster.
4-digit PIN
Enter zero followed by the 4-digit PIN directly in the Login field. For example, if your PIN is 1234, enter 01234.
[Do it!]

[Adaptation - 10]
Enter 050 in "Channel Number".
[Read]
For the following procedure, use the PIN of the OLD (ORIGINAL) instrument cluster.
4-digit PIN
Enter zero followed by the 4-digit PIN directly in the New Value field. For example, if your PIN is 1234, enter 01234.
[Test]
The values may change to "32000", this is normal
[Save]
[Done, Go Back]
[Close Controller, Go Back - 06]
Switch OFF the ignition and let the car sit for ~1 minute, then switch ON the ignition again.

Сам переведешь?

SeaDog · 28.09.2015, 19:27

Цитата:

Сообщение от dimstr1
Для просмотра ссылок или изображений в данном разделе, у Вас должно быть не менее 15 сообщение(ий). Сейчас у Вас 0 сообщение(ий).

[Select]
[17 - Instruments]

[Login - 11]
For the following procedure, use the PIN of the REPLACEMENT (NEW or USED) instrument cluster.
4-digit PIN
Enter zero followed by the 4-digit PIN directly in the Login field. For example, if your PIN is 1234, enter 01234.
[Do it!]

[Adaptation - 10]
Enter 050 in "Channel Number".
[Read]
For the following procedure, use the PIN of the OLD (ORIGINAL) instrument cluster.
4-digit PIN
Enter zero followed by the 4-digit PIN directly in the New Value field. For example, if your PIN is 1234, enter 01234.
[Test]
The values may change to "32000", this is normal
[Save]
[Done, Go Back]
[Close Controller, Go Back - 06]
Switch OFF the ignition and let the car sit for ~1 minute, then switch ON the ignition again.

Сам переведешь?

ага. огромное спасибо!\
все делал как и написано только в конце минуту не ждал....
Завтра буду пробовать опять )

28.09.2015, 19:22	#1 (permalink)
dimstr1 Завсегдатай Регистрация: 11.08.2013 Сообщений: 564 Вы сказали Спасибо: 12 Поблагодарили 94 раз(а) в 67 сообщениях Сказал(а) Фууу!: 1 Сказали Фууу! 0 раз(а) в 0 сообщениях Откуда: СПб Авто: Tiguan CLJA	[Select] [17 - Instruments] [Login - 11] For the following procedure, use the PIN of the REPLACEMENT (NEW or USED) instrument cluster. 4-digit PIN Enter zero followed by the 4-digit PIN directly in the Login field. For example, if your PIN is 1234, enter 01234. [Do it!] [Adaptation - 10] Enter 050 in "Channel Number". [Read] For the following procedure, use the PIN of the OLD (ORIGINAL) instrument cluster. 4-digit PIN Enter zero followed by the 4-digit PIN directly in the New Value field. For example, if your PIN is 1234, enter 01234. [Test] The values may change to "32000", this is normal [Save] [Done, Go Back] [Close Controller, Go Back - 06] Switch OFF the ignition and let the car sit for ~1 minute, then switch ON the ignition again. Сам переведешь? __________________ Связь без брака - цель радиста, что не делай - делай чисто.