VAG ODIS 2.1.0

theviy

Поставил E 6.2.2 по этой схеме, вроде работает, но только по синезубу.
Балда с OKI чипом прошилась 2.20.23, а другая балда без OKI совсем не видится как vas5054, только как com порт и не шьётся.
----------------------------------------------------
Module Short Name : VendorName='Softing AG' ModuleName='VAS5054' SerialNumber='082145725'
Module Vendor Name : Softing Automotive Electronics GmbH
Module HwName : VAS5054
Module SerialNumber : 82145725
Module FW Name : VeCom
Module FW-Version : 2.20.23
Module FW-Date : 8.9.2014 (Calendar week 36)
Module PDU-API SW Name : Softing D-PDU API for VCIs
Module PDU-API Version : 1.20.23
Module PDU-API SW Date : 8.9.2014 (Calendar week 36)

Install PostSetup.
Set the same as in ODIS-Service.
Only "second run" is not necessary. So long not necessary.
After installing Postsetup program will start and swear at not found on the base en_US.. It's OK. ))
Close program.
Do the following:
Open folder C:\Program Files (x86)\ODIS_Engineering_622\DIDB.
Next, go to the folder "data" and in all the folders with brands
find files that contain the file name en_GB, and rename at en_US.
Next, go to the folder "db" and find files that contain the file name en_GB, and rename at en_US.
Now the program will see the desired database.

The next step.
Folder "DIDB_ENGINEERING" empty.
More precisely, it will be a folder "data", and in the folder "data" empty folder "V".
Next, there are two variants.
First - full copy folder "data" and "db" folder in the "DIDB_ENGINEERING".
But it is - superfluous expenditure of disk space.
The second variant is more preferable.
The second variant is more preferable.
Delete all folders from "DIDB_ENGINEERING".
From the folder "DIDB" make symlinks - of folders "data" and "db" in the folder "DIDB_ENGINEERING".

Installation projects.
Place the folder "Projects" in the root directory disk "C:\".
Run ODIS-E.
Menu "Admin" -- "General" -- "Diagnostic Data"
"ODX Update index file 1" - Select "C:\Projets\AU\ODXUpdate.xml"
"ODX Update index file 2" - Select "C:\Projets\VW\ODXUpdate.xml"
"ODX Update index file 3" - Select "C:\Projets\SK\ODXUpdate.xml"
Save.
Exit the menu "Admin".
Go to menu "Configuration" -- "ODX Update"
Select all installed projects -- Start.
All projects will be installed.

Изображения

Чтобы получить возможность просматривать вложения других пользователей на форуме, у Вас должно быть не менее 15 сообщение(ий). Сейчас у Вас 0 сообщение(ий).