Audi B9 (A/S4, A/S5, RS5)Coding

Huston_91

Here are some coding if you are interested. I'll update the tread soon:
Lock with IgniƟon On
DescripƟon:
● 46-Central Module Comfort System
● Long Coding
● Change central_locking_system_lock_unlock_at_engine_runin g to active
● Press and hold green check mark to accept
Interior LighƟng Behavior

DescripƟon: Which interior lights turn on when opening the door. By default, only the light on the side
with the door open turns on.
● 46-Central Module Comfort System
● Long Coding
● Change light_scenario to not_active
● Press and hold green check mark to accept

Key-fob Range LimitaƟon
DescripƟon: Extend the range of the key fob
● 46-Central Module Comfort System
● Long Coding
● Change range_limitation_lock, range_limitation_rear, range_limitation_opening,
range_limitation_panic, and central_locking_system_requst_for_range_function to Not
Active
● Press and hold green check mark to accept
Increase Range of Comfort Window Open/Close with Key
DescripƟon:
● 46-Central Module Comfort System
● Long Coding
● “comfort_operation_range_limitation”
● Change from “active” to “not active”
● Press and hold green check mark to accept

DescripƟon: This looks like it will disable auto-unlock P
● 46-Central Module Comfort System
● Long Coding
● Automatic_unlock change to “Not Active”
● Automatic_unlock_nar change to “Not Active”
● Press and hold green check mark to accept

Parking Assist Speed Threshold
DescripƟon: Set speed at which parking assist will turn automaƟcally turn off
● 09-Central Electrics
● Adaptation
● “Switch off speed for parking assist” Default value is 5. Change to a max of 20. In mph.
● Press and hold green check mark to accept
Low-beam with high-beams
DescripƟon: Low beams stay on when high beams acƟve.
● 09-Central Electrics
● Long Coding
● Change low_at_flash from “not_active” to “active”
● Press and hold green check mark to accept
Easy Entry
DescripƟon: Moves the seat back to help enter and exit the vehicle
● Seat Adjustment Drivers Side (36)
● Long Coding
● Change Easy_Entry_front to Active
● Press and hold green check mark to accept
● “Store settings on remote control key” must be selected in the MMI Driver’s Seat settings
page
Additional coding:
● 09 Central Electrics
● Byte 14, bit 2 change from 0 to 1
and
● 36-Seat Adjust Drivers Side
● Byte 14, bit 2 change from 0 to 1
AutomaƟc Parking Brake when turning off Car
DescripƟon: Engages the parking brake when you turn off the car
● 03-Brakes
● Adaptation
● Automatic Parking Brake
● Change From Not Active to Active
● Press and hold green check mark to accept
● Security code: 4016