CATERPILLAR FLASH FILES

amr saeed · 03.07.2025, 11:38

Цитата:

Сообщение от Alexandr79

These are updates of the same firmware. You can install any of these firmware.

so many thanks bro

amr saeed · 03.07.2025, 18:26

one more thing bro just for the emcp 4.2 for the same engine ,need its flash file just in case i had to install it.

PART NUM:450-9606-00
S/N:2245E042TX

ENGLISH VERSION.

GENSET CAT C32
Engine s/n: PRH04759
Generator s/n: CAT00C32EJAZ01969
MODEL: 1100 F 1100 KVA 1500 RPM 50 Hz YEAR :2014

THANKS AGAIN

Alexandr79 · 03.07.2025, 20:09

The firmware for the EMCP controller is the same for all engines.

amr saeed · 03.07.2025, 20:19

Цитата:

Сообщение от Alexandr79

The firmware for the EMCP controller is the same for all engines.

got it bro.,,thanks alot

amr saeed · 05.07.2025, 12:25

HELLO BROS , NEED FLASH FILE FOR TH FOLLOWING ECM,
ENGLISH VERISON.

NEW ECM P/N:478-7932-01
03128149JL

ENGINE PERKINS S/N:TGBF7169U16496X
MODEL:2206A-E13TAG2

GENERATOR FGWILSON P400-1

POWER WIZARD 1.1 1500 RPM ,50 HZ

S/N:FGWPES29CPCJ00453

P.s:i know it is for cat flash files but if you kan help me in this or suggest a person or site that could help me in this it would be appreciated.
thanks again.

Alexandr79 · 05.07.2025, 21:08

If you can find the flash file number (for example, on a similar engine), then I might be able to find this file for the engine.

I have the file for the panel PowerWizard 1.1.

amr saeed · 05.07.2025, 22:16

Цитата:

Сообщение от Alexandr79

If you can find the flash file number (for example, on a similar engine), then I might be able to find this file for the engine.

I have the file for the panel PowerWizard 1.1.

thanks for your help , tomorrow i will try to get you the flash file from a similar genset, but please explain to me how to get it .

amr saeed · 05.07.2025, 22:35

Цитата:

Сообщение от amr saeed

thanks for your help , tomorrow i will try to get you the flash file from a similar genset, but please explain to me how to get it .

like this photo ??? the software id ?? or something else ?

amr saeed · 05.07.2025, 23:00

Цитата:

Сообщение от amr saeed

like this photo ??? the software id ?? or something else ?

&one more thing,, will it need the est 10 digit factory password even the ecm is new or this only required in case using old used one ??

Alexandr79 · 06.07.2025, 07:38

It is best if you make the product status report in PDF format.

03.07.2025, 18:26	#642 (permalink)
amr saeed Новичок Регистрация: 29.09.2022 Сообщений: 27 Вы сказали Спасибо: 6 Поблагодарили 1 раз в 1 сообщении Сказал(а) Фууу!: 0 Сказали Фууу! 1 раз в 1 сообщении Откуда: egypt Авто: yes	EMCP 4.2 FLASH FILE one more thing bro just for the emcp 4.2 for the same engine ,need its flash file just in case i had to install it. PART NUM:450-9606-00 S/N:2245E042TX ENGLISH VERSION. GENSET CAT C32 Engine s/n: PRH04759 Generator s/n: CAT00C32EJAZ01969 MODEL: 1100 F 1100 KVA 1500 RPM 50 Hz YEAR :2014 THANKS AGAIN

05.07.2025, 12:25	#645 (permalink)
amr saeed Новичок Регистрация: 29.09.2022 Сообщений: 27 Вы сказали Спасибо: 6 Поблагодарили 1 раз в 1 сообщении Сказал(а) Фууу!: 0 Сказали Фууу! 1 раз в 1 сообщении Откуда: egypt Авто: yes	GENSET FGWILSON P400-1 ECM FLASH FILE HELLO BROS , NEED FLASH FILE FOR TH FOLLOWING ECM, ENGLISH VERISON. NEW ECM P/N:478-7932-01 03128149JL ENGINE PERKINS S/N:TGBF7169U16496X MODEL:2206A-E13TAG2 GENERATOR FGWILSON P400-1 POWER WIZARD 1.1 1500 RPM ,50 HZ S/N:FGWPES29CPCJ00453 P.s:i know it is for cat flash files but if you kan help me in this or suggest a person or site that could help me in this it would be appreciated. thanks again. Последний раз редактировалось amr saeed; 05.07.2025 в 12:44..