CATERPILLAR FLASH FILES

amr saeed · 07.06.2025, 13:36

Цитата:

Сообщение от Alexandr79

Passwords cannot be made now, because the engine serial number is incorrect. Equipment no is also incorrect. These numbers can only consist of numbers and English characters. You can try to fix these numbers, but if the ECM is dead, they will be lost again, as will other settings.

thnks for your help,
this photo from woodward share module alarm which is non erasable is a great sign that ecm is dead
it shows:engine fault feed back
so my question is if i copied configuration before i intall new ecm with new flash file & pated configuration would it repeat all this bad alarms when it is done or it won't ?
cause i'm afraid to lose the new ecm & not solve the issue either

Alexandr79 · 07.06.2025, 16:11

You can create a copy of the configuration to install it in a new block later. But if the configuration is damaged (from your photos it is clear that it is partially damaged), then this is not critical, the configuration can be easily reconfigured.

amr saeed · 07.06.2025, 22:34

Цитата:

Сообщение от Alexandr79

You can create a copy of the configuration to install it in a new block later. But if the configuration is damaged (from your photos it is clear that it is partially damaged), then this is not critical, the configuration can be easily reconfigured.

thanks alot Alxander your words helped me so much

much appreciated bro

amr saeed · 07.06.2025, 23:46

hello Bro, i need the electerical schematic for the generator cat c32 with EMCP 4.2 Equipped with a sync panel woodward LSM Model :easy gen 3200 for the fuse box & relays as in pic.
Engine s/n: G1B01127
Arrangment Num: 432-6120
Generator s/n: CAT00C32EJAZ01969
MODEL: 1100 F
1100 KVA
1500 RPM 50 Hz YEAR :2014

Алексей 1336 · 26.06.2025, 16:42

Здравствуйте, есть ли у кого флеш

mega357 · 26.06.2025, 17:35

Держи

amr saeed · 02.07.2025, 20:18

hello bros,
need your help for a flash file for this blank ECM
CAT A4E4
478-7932-01
02928101JL
english version
thanks in Advance

Alexandr79 · 02.07.2025, 20:57

There are many firmware versions that can be loaded into your ECM. Tell us the engine serial number, then we can understand which firmware is needed.

amr saeed · 02.07.2025, 22:28

Цитата:

Сообщение от Alexandr79

There are many firmware versions that can be loaded into your ECM. Tell us the engine serial number, then we can understand which firmware is needed.

Generator CAT C32

s/n: CAT00C32EJAZ01969

Engine :PRH04759

EMCP 4.2 POWER WIZARD

MODEL: 1100 F
1100 KVA
1500 RPM 50 Hz YEAR :2014

Alexandr79 · 03.07.2025, 06:02

These are updates of the same firmware. You can install any of these firmware.

07.06.2025, 16:11	#632 (permalink)
Alexandr79 Участник тусовки Регистрация: 29.11.2015 Сообщений: 199 Вы сказали Спасибо: 3 Поблагодарили 108 раз(а) в 85 сообщениях Сказал(а) Фууу!: 0 Сказали Фууу! 0 раз(а) в 0 сообщениях Откуда: Екатеринбург	You can create a copy of the configuration to install it in a new block later. But if the configuration is damaged (from your photos it is clear that it is partially damaged), then this is not critical, the configuration can be easily reconfigured. amr saeed likes this.

02.07.2025, 20:18	#637 (permalink)
amr saeed Новичок Регистрация: 29.09.2022 Сообщений: 27 Вы сказали Спасибо: 6 Поблагодарили 1 раз в 1 сообщении Сказал(а) Фууу!: 0 Сказали Фууу! 1 раз в 1 сообщении Откуда: egypt Авто: yes	ECM hello bros, need your help for a flash file for this blank ECM CAT A4E4 478-7932-01 02928101JL english version thanks in Advance

02.07.2025, 20:57	#638 (permalink)
Alexandr79 Участник тусовки Регистрация: 29.11.2015 Сообщений: 199 Вы сказали Спасибо: 3 Поблагодарили 108 раз(а) в 85 сообщениях Сказал(а) Фууу!: 0 Сказали Фууу! 0 раз(а) в 0 сообщениях Откуда: Екатеринбург	There are many firmware versions that can be loaded into your ECM. Tell us the engine serial number, then we can understand which firmware is needed.