Anton28ru

https://mega.nz/#F!VfQACYzA!DYDcpHKKMKpvgGZkO2561Q

https://mega.nz/#!X8JgWQiJ!PKv24j9hJ...sBnXvQ3INfobOo

https://mega.nz/#!60I0QS7B!4MiAlSO9P...PS4-5DvScwhgrw

1. First unzip 8.5 and run "admininstall" as admin.' Once Install go to Step 2.

2 Use "Cummins Update Manger and upgrade 8.5 to 8.5.2 ( that means do all update First to 8.5.1 then to 8.5.2)

How to activate

This method use a sideloader just like 8.3 so will need run 8.5.2 in Simulation mode.

Put the Sideloader folder on your C: Drive

Next go into the folder and you will see "Cummins Insite 8.5.2" Create a destop shortcut to your desktop

Next go to Keygen folder and navigate to folder "EXE" inside that folder you wiil see WLGEN run it



Next double click on your shortcut desktop icon for the Insite 8.5.2 that you made you it will show HWID don't worry you don't need to write it down it
will auto copy the hwid

Go back to the WLGEN tool and click on License Manager and then click " Add License " Put any Customer name you want next click Hardware ID and right click to paste the
Hardware ID into the spot.

Make sure set a Date of Experiation or else the sideloder will not work

Next click save then to Create License Key Now go look into the folder that is just made and copy the registery.dat file

Place that file into the sideloader Folder on the C drive that has Cummins 8.5.2 sideloader

Now go back to your desktop and launch 8.5.2 shortcut > I will repeat if ask you click on the simulation

For the Folks don't know to use the program

This work's like 8.3 so the zapit and fleet counts are built into the side loader you don't need no key's

Only way the zapit will work or show up is to be connected to the ECM. Once connected to a lock ecm it will show up after a few minutes...

__________________
All questions in whatsapp +79145723682; live:akim28ru